5 in 1 Class 2 Dim J-BOX LED Driver 180W

This triac dimming led driver 12V operates high wattage 180W, but also meet Class 2 standard. A type of muitlple output 3*60W. Driver for wet & damp & dry location. dimmers for US versionis recommended. Model SMT-012-180VTD52JV2 (1.0 version) SMT-024-192VTD52JV2 (1.0 version) SMT-012-180VTD52JWV2 (2.0 version) SMT-024-192VTD52JWV2 (2.0 version) Output DC Voltage 12V 24V Voltage Tolerance ±0.5V Voltage Regulation ±0.5% Voltage Tolerance ±0.5V Load Regulation ±1% ±1% Rated current 3*5A 2*4A Rated power 180W(3*60W) 192W (2*96W) Input Voltage Range 100-277VAC Frequency Range 47~63HZ Power Factor(Typ.)@full load 0.99@120VAC  0.94@277VAC 0.99@120VAC  0.94@277VAC THD(Typ.)@full load <20% Full Load Efficiency(Typ.) 86%@120VAC , 88%@277VAC 87%@120VAC , 89%@277VAC AC Current(Typ.) 2.2A@100VAC 2.3A@100VAC Inrush Current (Typ.) 19A (twidth=1.3ms) @120VAC ; 38A (twidth=960us) @277VAC 19A (twidth=1.3ms) @120VAC ; 38A (twidth=960us) @277VAC Leakage current <0.50mA Protection Short Circuit shut down o/p voltage, re-power on to recover after fault condition is removed Over loading ≤120% constant current limiting, auto-recovery Over temperature 100℃±10℃ shut down o/p voltage, automatically recover after cooling. Over Current ≤1.4*I out Environment Working TEMP. -40~+60℃ Working Humidity 20~90%RH,non-condensing Storage TEM.,Humidity -40~+80℃,10~95%RH TEMP.coefficient ±0.03%/℃(0~50℃) Vibration 10~500Hz 2G 10min./1 cycle,period for 60min.each along X,Y,Z axes Safety&EMC Safety standards UL8750+UL1310 Withstand voltage I/P-O/P: 1.88KVAC   Isolation resistance I/P-O/P:100MΩ/500VDC/25℃/70%RH EMC EMISSION FCC Part 15 B    Others Weight 2.3Kg       Size 1.0version:278*110*45mm/2.0version:278*130*45mm(L*W*H)               packaging 340*210*245mm/8pcs /CTN    G.W.:19.50KG/CTN (1.0 version) 385*335*200mm     20PCS/CTN Notes 1. All parameters NOT specially mentioned are measured at 110V & 277VAC input , rated load and 25℃of ambient temperature.    2..Tolerance:includes set us tolerance,line regulation and load regulation.    [Custom Product Tab] Input wire Black and White to be connected to AC L and N ,Green wire go ground, Output wire Red to LED Positive side (+) , Black to LED Negative side (-).? Dimming cable DIM (+) Purple to 0/1-10V dimmer signal(+ ),DIM (-) Grey to 0/1-10V dimmer signal (-) Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged. ¡ö?Connecting Diagram Using TRIAC/Phase cut dimming 1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system. 2.Work with forward phase /leading edge ,MLV and?reverse phase /trailing edge ,ELV,TRIAC dimmers. 3.Please try to use dimmers with power at least 1.5 times as the output power of the driver. ?Using 0-10/1-10V dimming ? [/Custom Product Tab]