5 in 1 Dimmable LED Driver 80W (Standard Size)

The waterproof electronic led driver has a wide input range from 100-277VAC,which operates smooth dimming effect from 0-100%. dimmers 100-130V shows perfect dimming after we tested. model SMT-012-080VTD SMT-024-080VTD Output DC Voltage 12V 24V Voltage Accuracy ±0.5V ±0.5V Rated current 6.66A 3.33A (class 2) Rated power 80W Input Voltage Range 100~130V AC/170~265V AC Frequency Range 47~63HZ Power Factor ( Typ.) PF≧0.95/110V,PF≧0.96/170V,PF≧0.95/220V,PF≧0.93/265V Full Load Efficiency(Typ.) 80%@120VAC   82%@277VAC 82%@120VAC   85%@277VAC THD(Typ. ) @ full load <20%@120VAC &277VAC AC Current(Typ.) 1.15A Inrush Current (Typ.) 20A, 50%, 1.6ms @120VAC;   25A, 50% 1.2ms @277VAC Leakage current ﹤0.5mA Protection Short Circuit Hiccup mode, recovers automatically after fault condition is removed. Over temperature 100℃±10℃ shut down o/p voltage, automatically recover after cooling. Over Load ≤120% constant current limiting, auto-recovery Environment Working TEMP. -40~+60℃ Working Humidity 20~90%RH,non-condensing Storage TEM.,Humidity -40~+80℃,10~95%RH TEMP.coefficient ±0.03%/℃(0~50℃) Vibration 10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z  axes Safety&EMC Safety standards UL8750 + UL1310 , CAN/CSA-C22.2 No.250.13   Withstand voltage I/P-O/P:1.88KVac  Isolation resistance I/P-O/P:100MΩ/500VDC/25℃/70%RH  EMC EMISSION FCC 47 CFR Part 15 ,Subpart B Others Weight 1.1Kg Size 230*70*43mm(L*W*H) packing Carton size:340*275*170mm  ,   10pcs /CTN Notes 1. All parameters NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. 2. Tolerance: includes set up tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.  [Custom Product Tab] Dimming Operation and Connecting Diagram ¡ùUsing two ways of dimming at the same time, you must be assured that LED lighting is up to the max. Brightness then you could operate with the other dimming; ¡ùUsing one dimming ---TRIAC/Phase cut dimming 1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.2.Working with forward phase /leading edge ,MLV and Reverse phase /trailing edge ,ELV,TRIAC dimmers 3.Min loading is about 10%4.Please try to use dimmers with power at least 1.5 times as the output power of the driver. [/Custom Product Tab]