It’s All A Bunch Of Hocus Pocus Glowforge SVG | Halloween Round Sign Design

It’s All A Bunch Of Hocus Pocus Glowforge SVG | Halloween Round Sign DesignIt’s All A Bunch Of Hocus PocusBased on my best selling cut file.The design can be cut using only 1 sheet of material. I applied 3M to ½ of the back of one side of the wood so the words and elements can be applied easily.You will cut all pieces except the word design inside the round (this will be scored, which is optional but helps with placement).After cutting my design (for approximately 10 inches diameter) it took me around 14 minutes with my Glowforge pro.*Use caution when removing pieces, some are small and can be lost if not carefully removed from laser bed.. I would not cut smaller than the size listed above.Once cut I removed the masking. I painted the pieces the colors of my choice. Allow to dry completely before gluing. Once dry, I then remove the 3m tape from the elements and applied to my square.Voila! You are done!Please Note: You can use glue instead of 3M. I just find 3M to be faster and easier.*