GEPRC Mark4 Mark Frame Carbon Fiber 225mm 260mm 295mm FPV Racing Drone Freestyle X Quadcopter 5mm Arm GEP 5" 6" 7" RC Drone

Introduction: I want to the fancy frame in flight perfectly , the lighter frame, the convenient electronics installation and balanced center of gravity, and the smooth flight shooting, these ideas create a new fancy frame is Mark4.   It is no longer a wide X design, but an H-shape, which does not affect the flight experience. The benefit is that the arm length is shortened, the weight is reduced, and the arm strength is increased. It is also provides more installation space for the middle position of the low center machine compartment. Of course, you can also mount the arm to the bottom for more installation space.   The mounting size of the FPV lens is adjusted to 19*19. There are 30.5*30.5 and 20*20 mounting holes in the middle section and the second half, and there are more directions in the selection of the flight control. In the middle section, 30.5*30.5 has been set up with soft-installed silica gel, which can reduce the pressure caused by vibration to the flight control for a greater extent, thus achieving smooth flight.   The arm of the frame is chamfered with the upper and lower plates. The upper plate uses a countersunk screw to make the surface more flat. There are also front and rear bumpers that allow the player to provide protection while flying while reducing losses and facilitating replacement. Of course, there are also custom-made thick aluminum columns to ensure the strength of the rack!   All the elements of this fancyframe, I believe that  it can bring you flying fun and smooth flight shooting!     5inch parameters: Name: GEP-Mark4-5 Weight: 102g Wheelbase: 225mm Blade size: 5inch Size: 145*172mm Arm thickness: 5mm Body panel thickness: 2.5mm Splint thickness: 2mm Front and rear protection frame thickness: 2mm     6inch parameters: Name: GEP-Mark4-6 Weight: 111g Wheelbase: 260mm Blade size: 6inch Size: 162*203mm Arm thickness: 5mm Body panel thickness: 2.5mm Splint thickness: 2mm Front and rear protection frame thickness: 2mm      7inch parameters: Name: GEP-Mark4-7 Weight: 121g Wheelbase: 295mm Blade size: 7inch Size: 193*223mm Arm thickness: 5mm Body panel thickness: 2.5mm Splint thickness: 2mm Front and rear protection frame thickness: 2mm     5-inch recommended configuration:not include   Flight Control: RF/Kiss/F4/F3/F7 Motor: 2205/2206/2207/2207.5/2305/2306 ESC: 30A-50A Battery: 4S 1500mAh ~ 6S 1150mAh     6 inch recommended configuration: not include   Flight Control: RF/Kiss/F4/F3/F7 Motor: 2207/2207.5/2305/2306/2407 ESC: 35A-60A Battery: 4S 1500mAh ~ 6S 1300mAh     7 inch recommended configuration: not include   Flight Control: RF/Kiss/F4/F3/F7 Motor: 2207.5/2305/2306/2407/2408/2507 ESC: 40A-60A Battery: 4S 1800mAh ~ 6S 2200mAh       Package Includes: GEPRC Mark4  quadcopter frame * 1 set   (version as your choice) Camera , motor  is not included!