Allen and Heath DLive CTI1500 Mixing System with DM64 Mixrack

Allen and Heath DLive CTI1500 Mixing System with DM64 Mixrack Listing includes fader surface and DM64 Mixrack Allen & Heath dLive C Class CTi1500 12 Fader Surface with 12-Inch Touchscreen dLive is a distributed digital mixing system providing a uniquely flexible solution for any live sound application. It separates the mix engine from the control surface, putting the audio and processing where it is needed, and offering a host of control and audio networking possibilities. Refer to the Allen & Heath website to find out more about dLive. Features: Fully assignable layout Single or twin 12” capacitive touchscreen Gesture control – pinch, swipe, drag ‘n drop Configurable widget areas for Scenes, meters, FX and more 19 assignable SoftKeys (26 on S3000, S5000, S7000) Engineer’s Wedge and IEM fader strips Comprehensive multipoint metering Daylight visibility USB stereo recording and playback Specifications: Inputs: Mic/Line Inputs: Balanced, +48V phantom power Mic/Line Preamp: Fully recallable Input Sensitivity: -60 to +15dBu Analogue Gain: +5 to +60dB, 1dB steps Pad: -20dB Active PAD Maximum Input Level: +30dBu (PAD in) Input Impedance: >4kΩ (Pad out), >10kΩ (Pad in) Mic EIN: -127dB with 150Ω source Phantom Power indication: Per socket, internal or external phantom power sensing, triggered at +24V Digital Inputs: AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω SRC range 32k - 192kHz, with bypass option System: Measured balanced XLR In to XLR Out, 22-40kHz, minimum Gain, Pad out Dynamic Range: 110dB System Signal to Noise: -92dB Frequency Response: 20Hz - 30kHz +0/-0.8dB THD+N (analogue in to out): 0.0015% @ +16dBu output, 1kHz 0dB gain Headroom: +18dB Sampling Rate: 96kHz +/- 20 PPM Internal operating Level: 0dBu dBFS Alignment: +18dBu = 0dBFS (+22dBu at XLR output) Meter Calibration: 0dB meter = -18dBFS (+4dBu at XLR out) Meter Peak indication: -3dBFS (+19dBu at XLR out) Sampling Rate: 96kHz Outputs: Analogue Outputs: Balanced, Relay protected Output Impedance: <75Ω Nominal Output: +4dBu = 0dB meter reading Maximum Output Level: +22dBu Residual Output Noise: -92dBu (muted, 20-20kHz), -90dBu (muted, 20-40kHz) Digital Outputs: AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω 96kHz sampling rate, globally switchable to 48kHz, 44.1kHz Dimensions and Weights (Width x Depth x Height x Weight): Unboxed: 440 x 644 x 337 mm x 11.5kg (17.4"x 25.4"x 13.27") (25.4lbs) Boxed: 655 x 820 x 470 mm x 20kg (25.8"x 32.3"x 18.5") (44lbs) Allen & Heath DM64 DLive Mixrack 64-In x 32-Out The DM64 dLive Mixrack / Mainframe has 64 analogue inputs and 32 analogue outputs of local I/O. Like all dLive MixRacks, DM64 has a 128 Input x 64 Output matrix, all with full processing, all running at a 96kHz sample rate and featuring a 96Bit accumulator. Up to 48 I/O endpoints can be created via Allen & Heath networked I/O boxes running the DX and gigaACE protocols. Almost any external control system capable of making a TCP/IP connection can be used to control DM64, in addition to Allen & Heath’s own IP remote controllers and dLive Surfaces. Features: 128 Input x 64 output matrix 64 channels of Auto Mic Mixing Ethernet based audio expansion Redundant PSU & audio connections External control drivers available 64 Analogue inputs, 32 analogue outputs Specifications: Type: Digital Stage Box Mixer Compatibility: dLive Surface Channels: 128 total input channels (64 x 32 immediate I/O) Inputs - Mic Preamps: 64 x XLR (mic/line) Phantom Power: 64 channels Data I/O: 2 x EtherCon (GigaACE links), 4 x EtherCon (DX redundant), 2 x Ethernet RJ-45 (network), 1 x EtherCon (ME-1) Busses/Groups: 64 bus Computer Connectivity: Ethernet Word Clock: In/Out I/O Expansion Slots: 3 x slots (MADI, Dante, Waves, ACE, SoundGrid) Headphones: 1 x 1/4", 1 x 1/8" EQ Bands: Parametric, Graphic Effects: 16 RackExtra FX library Signal Processing: Dynamics Software: dLive Editor Rackmountable: Yes Power Source: Dual redundant, hot swappable power supply Height: 18" (including foot risers) Depth: 12.3" Width: 19" Weight: 46 lbs.