JBL VLA-C125S-GR Dual 15-Inch Subwoofer for VLA Compact Line Array System - Gray

JBL VLA-C125S-GR Dual 15-Inch Subwoofer for VLA Compact Line Array System - Gray The VLA-C125S utilizes JBL's proven technology components, featuring dual 15” Differential Drive® transducers. Enclosures are constructed with multi-layer reinforced fiberglass and steel end-panels. The grilles are made from zinc-plated, powder-coated 14-gauge perforated steel, with an acoustically transparent black grill cloth backing, a hydrophobic mesh underlayer, and a waterproof rail system. The rigging system is integral to the design of the system. Inter-box angles are selected during array assembly. Additional accessories include a rigging frame, pull-back bar, and a cardioid kit. Features: A fully featured compact and light weight moving yoke spot fixture with an Intense 350 W LED light engine, two gobo wheels, one rotating, and one static, a 3-facet prism wheel, frost, and two color wheels. 16-bit dimming of master dimmer for smooth control of fades Perfect gobo morphing between gobo wheels Two color wheels with 8 colors, split color ability, and continuous variable speed scrolling Two gobo wheels: one fixed scrolling wheel and one rotating, interchangeable, scrolling wheel. Iris, 3-facet prism, and frost for beam control True 1 compatible power input/output connections for power linking. 3- and 5-pin DMX input/output connections RDM enabled for remote addressing and trouble shooting. Selectable LED maximum output to match legacy Rogue R2X Spots Selectable PWM settings to maintain flicker-free operation on camera. Simple and complex DMX channel profiles for programming versatility Specifications: Frequency Range (-10dB): 52 Hz – 210 Hz Frequency Response (±3 dB): 62 Hz – 123 Hz System Power Rating: 1600 W Continuous Pink Noise (6400 W peak), 2 hrs 800 W Continuous Pink Noise (3200W peak), 100 hrs Maximum Input Voltage: 80 V Rms (2 hrs), 160 V peak Maximum SPL (1m): 127 dB Cont. Ave (2 hrs) 133 dB Peak Sensitivity: 98 dB (52 Hz – 210 Hz, 2.83V) Impedance: 4Ω, 3.0Ω min @ 195 Hz Amplifiers: Crown DCi Family with DSP on-board Recommended: Crown DCi 2 | 2400N Crown DCi 4 | 2400N LF Driver: 2 x 2275H, 304 mm (15 in) diameter, each with two 76 mm (3 in) diameter voice coils Neodymium Differential Drive®, Direct Cooled™ Enclosure Material: Fiberglass shell, gelcoat finish, with 18 mm Birch plywood internal bracing. Grille: Powder coated 14 gauge hex-perforated steel with zinc under-coating, backed with acoustically transparent cloth and hydrophobic screen. Inter-Enclosure Angles: VLA-C125S to VLA-C125S: 0° using VLA-C125S Bracket Plate (included with VLA-C125S) VLA-C265 below VLA-C125S Subwoofer (VLA-C265 cannot be connected above C125S): 0°, 5° using VLA-C125S Bracket Plate (included with VLA-C125S) VLA-C2100 below VLA-C125S Subwoofer (VLA-C2100 cannot be connected above C125S): 0°, 7.5° using VLA-C125S Bracket Plate (included with VLA-C125S) Environmental: IP-55 rating per IEC529 (dust protected and protected against jets of water). Terminals: CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs. Touch-proof covers. Full set of terminals on back panel, plus optional-use inter-cabinet connection terminals located on top and bottom panels of cabinet. Colors: Gray (similar to Pantone 420C) Dimensions (H x W x D): 508 x 848 x 634 mm (20.0 x 33.4 x 24.9 in) Net Weight (each): 56.7 kg (125 lbs) Shipping Weight (ea): 62.6 kg (138 lbs) Included Accessories: 2 x VLA-C125S Bracket Plates 8 pcs. M10 x 35 mm stainless steel bolts (1.5mm pitch, 6 mm hex-drive) for attaching Bracket Plates 2 pcs. Plastic Trim Cover Panels for Bracket Plates, each attaches via 4 pcs (8 total) 3-32 x ½” trusshead, phillips-drive, stainless steel bolts. Optional Accessories: VLA-C-SB2 (JBL-VLACSB2BK) Suspension Bracket Kit VLA-C125S-ACC Kit – For wiring of 3 VLA-C-125S subwoofers in cardioid configuration (2 front-facing and 1 rear-facing). Allows for neat, unexposed inter-cabinet wiring via the tops and bottoms of cabinets.