Shure QLXD14 Combo System with QLXD1 Bodypack and QLXD4 Receiver - J50A Band

Shure QLXD14 Combo System with QLXD1 Bodypack and QLXD4 Receiver - J50A Band Shure QLX-D™ Digital Wireless is the clear choice for exceptionally detailed wireless audio in widely diverse and demanding environments. A highly flexible system featuring streamlined setup and operation, QLX-D boasts impressive RF efficiency to get more channels on air using less spectrum, while the rugged all-metal construction withstands the rigors of constant use. From corporate seminars to music clubs, classroom lectures to houses of worship, Shure QLX-D Digital Wireless has it covered – delivering confident performance, no matter what the venue. Features: Transmitter: Rugged metal construction Backlit LCD with easy to navigate menu and controls 2 x AA batteries provide up to 9 hours of runtime Optional Shure SB900A lithium-ion rechargeable battery provides up to 10 hours of runtime Displays remaining battery life in hours and minutes when Shure SB900A is used Switchable RF power (1,10mW) External charging contacts for docked charging Receiver: Transparent, 24-bit digital audio 20 Hz - 20 kHz frequency range 120 dB dynamic range No transmitter gain adjustment needed Up to 72 MHz overall tuning bandwidth 22 compatible channels per 8 MHz TV channel Up to 168 compatible channels per frequency band AES 256-bit encryption Ethernet networkable receivers Automatic channel scan quickly and easily fi nds a new frequency Network Scan fi nds clean frequencies for networked receivers IR Sync AMX/Crestron® control system ready ShurePlus™ Channels mobile app compatible Wireless Workbench® control software compatible Displays remaining battery life in hours and minutes when Shure SB900A is used Compatible with ULXD6 Boundary Transmitter and ULXD8 Gooseneck Transmitter Specifications: System: Frequency Band: J50A (572 - 616 Mhz) Image Rejection: >70 dB, typical Latency: <2.9 ms RF Sensitivity: -97 dBm at 10-5 BER Working Range: 100 m line-of-sight Audio Frequency Range: 20 Hz to 20 kHz Note: Dependent on microphone type. Audio Dynamic Range (System Gain @ +10): >120 dB, A-weighted, typical Total Harmonic Distortion: <0.1% (−12 dBFS input, System Gain @ +10) Operating Temperature Range: -18°C to 50°C Receiver: Dimensions: 41 mm x 197 mm x 151 mm Weight: 777 g, without antennas Housing: Steel Power Requirements: 12 V DC @ 0.4 A, supplied by external power supply (tip positive) Spurious Rejection: > 80 dB, typical Antenna Connector Type: BNC Antenna Impedance: 50 Ω Gain Adjustment Range: -18 to +42 dB (in 1 dB steps) Configuration: ¼" (6.35 mm): Impedance balanced (Tip = audio, Ring = no audio, Sleeve = ground ) XLR: balanced (1= ground, 2 = audio +, 3 = audio −) Antenna Impedance: ¼" (6.35 mm): 100 Ω (50 Ω Unbalanced) XLR: 100 Ω Full Scale Outpu:t ¼" (6.35 mm): +12 dBV XLR: LINE setting = +18 dBV, MIC setting = -12 dBV Mic/Line Switch: 30 dB pad Network Interface: Single Port Ethernet 10/100 Mbps Network Addressing Capability: DHCP or Manual IP address Transmitter: Dimensions: 86 mm x 65 mm x 23 mm without antenna Weight: 138 g, without batteries QLXD2: 347 g, without batteries Note: Final weight depends on cartridge. Housing: Cast aluminum Battery Type: Shure SB900A Rechargeable Li-Ion or AA batteries 1.5 V Battery Runtime: (@ 10 mW) Shure SB900A rechargeable: up to 10 hours alkaline: up to 9 hours RF Output Power: 1 mW or 10 mW Occupied Bandwidth: < 200 kHz Modulation Type: Shure proprietary digital Mic Offset Range: 0 to 21 dB (in 3 dB steps)