Crown Audio DCI 4|2400N DriveCore Install Network Amplifier with BLU Link
The DriveCore install series amplifiers are a cutting-edge range of installation amplifiers leveraging the innovative DriveCore technology. These DCi Series amplifiers set the benchmark in quality, performance, and flexibility for challenging sound applications in the 21st century. Designed with precision and engineered to the highest industry standards, they provide integrators with advanced features required for today's installed sound scenarios. Features: Analog & Digital Inputs: The amplifiers feature digital audio transport through HARMAN’s proprietary BLU link, alongside balanced analog inputs, delivering exceptional audio advantages at a lower cost. The priority input router ensures seamless audio continuity by automatically switching to the secondary input if the primary signal is lost. Network Monitoring & Control: HiQnet™ protocol enables advanced monitoring, control, and audio manipulation over standard TCP/IP. Integrators can remotely monitor the performance of all networked DCi amplifiers and exercise control as needed. Audio Architect software and the Powered by Crown app are compatible with DCi amplifiers, facilitating ease of use and management. Programmable General Purpose Input/Output Ports: The GPIO ports offer versatile configuration options, allowing integrators to set functions like volume controls, preset recalls, or error reporting to a master computer. Digital Signal Processing: LevelMAX Limiters Input/Output EQ Delay Matrix Mixer Speaker Line Monitoring Specifications: Frequency Response (8 Ohms, 20 Hz - 20 kHz): +/- 0.25 dB BLU Link Input Signal to Noise Ratio (A-Weighted): > 108dB Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz): 0.35% Voltage Gain: 34 dB Damping Factor (20 Hz to 100 Hz): >5000 Input Impedance (nominal balanced, unbalanced): 10 kOhms, 5 kOhms Maximum Input Level before Compression: +20 dBu Load Impedance (Stereo/Dual Mode): 2 - 16 Ohms; 70Vrms and 100Vrms Load Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and 200Vrms Cooling: Continuously variable speed forced air, front to back airflow Required AC Mains (+/- 10%): 100V-240V ~ 50/60 Hz IEC Power Connector: 30A IEC Dimensions: 19" x 3.5" x 19" (48.3cm x 8.9cm x 48.3cm) Weight: 29 lbs User Manual User Manual