Happymodel BNF Mobula8 2S 85mm Brushless Whoop BNF (UART ELRS, SP1 ELRS, FRSKY D8 Receiver)
Happymodel recently released the Mobula8 UART ELRS versions. This model features the new X12 ELRS Pro v1.1 flight controller, with an onboard VTX and UART ELRS receiver controlled by an ESP32 chip. This configuration provides a free UART set and allows you to flash a single ExpressLRS firmware for the Mobula8 ELRS. Features: X12 ELRS Pro v1.1 5-IN-1 AIO flight controller built-in 2.4G ELRS V3.0 and OPENVTX VTX Power up to 400mw ELRS V3.0 (Default), could flash elrs firmware for the receiver by wifi EX1103 KV110000 motors CaddxFPV Ant FPV camera Smooth and powerful Compatible for 1S-2S Lipo/LIHV battery Recommend 2S 450mah/550mah/650mah battery (Not include) Specifications: Brand Name: Happymodel Item Name: Mobula8 UART ELRS 2S 85mm Micro FPV whoop drone Wheelbase: 85mm Size: 120mm*120mm*50mm Weight: 43g Brushless Motors Specifications: Mode: EX1103 KV11000 Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Shaft Diameter: 1.5mm Motor Dimension(Dia.*Len): 13.5mm*15.5mm Weight(g):3.8g No.of Cells(Lipo):1-2S Propellers Specifications: Weight:0.88g Material: PC Pitch:2.3inch Props Dia:52.17mm Center Thickness:5mm Center Hole Dia:1.5mm Flight Controller Specifications: X12 ELRS Pro v1.1 AIO 5-IN-1 Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4 Sensor: ICM42688P(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw (MSP control) Built-in UART ExpressLRS v3.0.0 Built-in voltage meter sensor , voltage meter scale 110 Built-in current meter sensor , current meter scale 470 Onboard 4in1 ESC Specifications: Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Firmware target: Z_H_30 Default protocol: DSHOT300 Bluejay firmware ready Onboard 5.8g OPENVTX Specifications: Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) Caddx ANT 1200tvl Camera Specifications: Image Sensor: 1/3³ CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Weight: 2g (N.W.) Package Contents: 1x Happymodel Mobula8 Micro Whoop FPV Drone