PWM Channel-Controlled Lost Buzzer Location Beacon Alarm with Servo Extension

Connect the alarm between the servo and the receiver, i.e. act as a servo extension cord.Turn on your TX. and you will hear 2 x beep sound.Do not move any of the control stick on the TX or simply turn off the theTX. You will hear a continuous beep sound after 1 minute. It will stoponce u turn on your TX or move the control stick.If you ignore the continuous beep sound for around 2minutes,the beep sound will change the a louder V sound.You need to disconnect the alarm from the receiver in order to switch of the alarm. Step1 - Connect the alarm between the servo and the receiver, i.e. act as a servo extension cord.Step 2 - Power transmitter and buzzer will beep twice. Do not move the control sticksor simply turn off. You will hear a continuous beep sound after 1 minute. It will stoponce Step 3 - After 1 minute the buzzer will continually beep. After 2 minutes the buzzer will sound continuously. Disconnect to switch alarm.Note - Ensure polarity before powering receiver. Specificatio