Q450 Drone Kit Noxe F722 Flight Controller 30A ESC 2212 Motors Remote Controller
This F450 package includes everything needed to assemble a powerful 450-class drone for fun or photography. Each kit includes the frame, motors, electric speed controllers, power distribution board, power hookup cables with bullet connectors, and flight controller. With the powerful F722 flight controller, unlock tons of autopilot and pre-programmed potential with a variety of software and GPS options (not included). This is a time-tested and proven platform for aerial craft. This version of the Q450 features integrated PCB connections for direct soldering of your ESCs. This eliminates the need for a power distribution board or messy multi-connectors keeping your electronics layout very tidy. The V3 also comes with stronger molded arms over V1 and V2, so no more arm breakage at the motor mount on a hard landing. 2212 1000KV 3S Brushless Motor Specifications: KV: 1000 Operating Voltage: 2-3S Recommended Prop: 1045 Load Current (@11.1V): 15A Pull (@11.1V): 885g Efficiency (@11.1V): 5.1g/w Weight: 47g JHEMCU F722 NOXE Flight Controller Specifications: Model: F722 NOXE Main Control: STM32F722RE (216MHZ) Gyroscope: ICM-42688-P Barometer: DPS310 OSD Chip: AT7456E Black Box: 16MB LED Programming: supported BB Sound: supported Input Voltage: 3-6S I2C Interface: supported BEC: 5V/2.5A BEC: 10V/2.0A Camera Input: supported USART: UART1, UART2, UART3, UART4, UART5, UART6 Receiver: ELRS(CRSF),TBS(CRSF) ,SBUS,IBUS,DSM2,DSMX GPS: YES Compass: YES HD O3: YES ESC Signal: Dshot150,Dshot300,Dshot600 USB: TYPE-C Current Port: YES Voltage Sensor : YES DFU Button: YES Weight: 5g Flight Control Firmware: Betaflight_ 4.4.2_ JHEF7DUAL. HEX Installation Hole Spacing: 20MM * 20MM * 4MM Maximum Overall Size: 29MM * 29MM Q450 V3 450mm Quadcopter Drone Frame with Integrated Power Distribution Features: Built from quality glass fiber and polyamide nylon. Integrated PCB connections for direct soldering of your ESCs Pre-threaded brass sleeves for all of the frame bolts. Colored arms for orientation to keep you flying in the right direction. Large mounting tabs on main frame bottom plate for easy camera mounting. Easy assembly. Q450 V3 450mm Quadcopter Drone Frame with Integrated Power Distribution Specifications: Width: 450mm Height: 55mm Weight: 270g (w/out electronics) Motor Mount Bolt Holes: 16/19mm 10x4.5 Propellers (Set of 8) Specifications: Material: ABS (Acrylonitrile Butadiene Styrene) Size: 10 x 4.5 inches Compatibility: F450 Quadcopter Frame Color: Black + Red Quantity: Set of 8 propellers Mounting: 5mm Efficiency Stability Noise Reduction Application: General-purpose heavy lift efficiency propellers Package Contents: 1x Noxe F722 Flight Controller 1x Q450 Frame Kit Evolution PRO Mode 2 Controller (White) 1 x TGY-iA6C Receiver (with leads) 4x 2212 1000KV 3S Brushless Motors 4x Readytosky 30A Brushless ESCs 4x 10x4.5" Propellers Clockwise 4x 10x4.5" Propellers Counter-Clockwise 1x Power Connector (XT60) Harness 1x Flight Controller Wiring Harness 1x Wiring Diagram