DCM660R | True RMS Clamp Meter for Electrical and HVAC Work + DMM Functions

The Sanwa DCM660R is a digital clamp-meter with digital multimeter capabilities. The DCM660R can be used in a CAT III environment and can measure a current of up to 660 Amperes. Since this instrument also has digital multimeter functionalities it can also measure AC+DC voltage, resistance, and frequency as well as perform continuity tests. The device uses the double integration operation method and True RMS for AC measuring. The display on this device is a large 6600-count LCD display with backlight. The DCM660R has a safety design compliant with the IEC61010-1 standard. Meter comes with one set of test leads, carrying case and instructions. AC current measurable max. 660A & DMM function True RMS 6600-Count LCD with Back light Data hold Relative value Max/Min value hold Inrush current measurement Auto power save (15min after the last operation) (non-cancelable) IEC compliant Specifications Function Measuring Range Accuracy Resolution Input Impedance ACA 66/660A ±(2%+5) 0.01A   DCV 600V ±(1%+2) 0.1V 1MΩ ACV 600V ±(1.2%+5) 0.1V Frequency (A) 660/6.6k/30k ±(0.2%+1) 0.1Hz   Frequency (V) 660/6.6k/66k/100k ±(0.2%+1) 0.1Hz Resistance 660Ω ±(1%+7) 0.1Ω Continuity Buzzer sounds at less than 30Ω Open voltage: approx. 1.2V Sampling rate 3 times/sec. Bandwidth 50-500Hz Display 6600 Clamp diameter/Conductor size Φ30mm/10×50mm Battery LR03×2 Battery life Approx. 55 hrs.（Alkaline battery/Backlight off) Size/Mass H208×W69×D38mm/Approx. 265g Safety standards IEC61010 CAT.Ⅲ600V