JL Audio MX Marine Amplifier Monoblock Wide-Range 300 Watts 12v

JL Audio MX Marine Amplifier Monoblock Wide-Range 300 Watts 12v98406Model: MX300/1Monoblock Class D Wide-Range Amplifier, 300 W x 1 @ 2 ohms / 160 W x 1 @ 4 ohms - 14.4VEngineered specifically for powersports applications, the MX300/1 monoblock amplifier employs our high-speed NexD™ switching design to pack a serious audio punch, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.With a robust 300W of clean power into a 2-ohm load (14.4V, 1% THD), use one to drive a subwoofer, or grab a pair to deliver stunning output to a subwoofer system. The MX300/1 also features an adjustable low-pass crossover, a bass boost EQ, variable infrasonic filter and output polarity switch.Its dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals. With the addition of an M-RBC-1 remote level control (sold separately), subwoofer output can be directly controlled from the driver’s seat.This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 160 W RMS x 1 @ 3 ohms 220 W RMS x 1 @ 2 ohms 300 W RMS x 1 @ 1.5 ohms N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 160 W RMS x 1 @ 3 ohms 200 W RMS x 1 @ 2 ohms 250 W RMS x 1 @ 1.5 ohms N/A General Specifications Frequency Response 20 Hz - 12 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >85 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >64 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >150 / 50 Hz Damping Factor @ 2 ohms >75 / 50 Hz THD+N @ Rated Power <1% @ 2 ohms Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) Min.Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 24 dB/octave Filter Frequency Range 40 Hz - 400 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Defeat Function Yes Infrasonic Filter 20 Hz - 40 Hz, variable Bass Boost EQ 0 to +12 dB @ 43 Hz Output Polarity Switch Yes Remote Subwoofer Level Control Optional (M-RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output None Physical Specifications Height 1.77 in / 45 mm Width 8.66 in / 220 mm Depth 3.09 in / 78.5 mm Net Weight 3.18 lb / 1.44 kg What's in the Box: (1) Amplifier (4) Stainless steel mounting screws (1) Spare 30A fuse (1) User manual