Metcal CV-510 40W Connection Validation Digital Soldering System with Dual Simultaneous Ports
Features and Benefits RF SmarHeat® Technology provides greater power on demand technology Patented Connection Validation IMC Formation Technology 2.8" color touchscreen with bold graphics Communications Port for process traceability data and firmware graphics Precise tip temperature display Integrated Net Power Meter and Power graph Patented Chip-in-Cartridge technology Closed loop bi-directional communication Stores and records Cartridge attributes Provides traceability information Protects Power supply from non-conforming Cartridges Backwards compatible with MX series Power Supplies Password protection Product Includes CV-PS500: Power Supply CV-H1-AV: Advanced™ Handpiece CV-W1AV: Tip Saver Work Stand CV-CP1: Cartridge Removal Pad Metcal innovation has led the industry for decades, beginning with SmartHeat® Technology that senses the thermal load and instantly delivers power on demand to the solder joint. The embedded self-regulating heater delivers the right amount of Power based on the requirements of the solder joint. This provides a fast, safe and repeatable process with no calibration required. The intermetallic compound thickness is critical in the formation of a solder joint. Connection Validation (CV) Evaluates the quality of the solder joint by calculating the intermetallic compound formation and provides closed loop feedback to the operator. CV provides feedback to the operator via the LED light ring integrated in the handpiece. It takes the risk associated with the variables involved in the soldering activity and removes the success and failure determination of a good solder joint out of the hands of the operator. CV complements the skill of the operator to judge the quality of a solder joint by introducing an objective method of evaluating solder joint quality. This systemic and objective approach provides repeatability and a measurable standard to the soldering process. Specifications Input Line Voltage: 100 - 240 VAC, grounded circuit, 50/60 Hz Rated Power Consumption: 85 W max. Output Power: Variable, 40 W max.* Output Frequency: 13.56 MHz Heating Method: Induction, smartHeat® Display: 2.8” Color TFT Touch Display Display Resolution: 320*240 RGB Display Size: 2.8” Diagonal Display Active Area: 43.20 x 57.60 mm Connections: Dual Port, switchable Interface -Communication/Firmware Upgrade: Via USB port and appropriate software with compatible computer and cables. Power Supply Dim. W x D x H: 121 x 121 x 220 mm (4.8"" x 4.8"" x 8.7"") Power Supply Weight: 2.65 kg (5.8 lb.) Certification / Marking: cTUVus, CE Tip-to- Ground Potential: Tip-to-Ground Resistance: < 2 Ohm Ground Detection: Permanent Surface Resistivity: 105 - 109 Ohm Idle Temperature Stability: 1.1°C ( 2°F) in still air Tip Temperature Accuracy: Meets or exceeds IPC J-STD-001 Standard Power Cord Length: 183 cm, 18/3 SJT Warranty: 5 years Ambient Operating Temp: 10 - 40°C (50 - 104°F) Max. Enclosure Temp: 55°C (131°F)