DarwinFPV "Cement" Ultra Durable F7-100A Waterproof Stack
www.stonehobby.com
Electronics / Components

DarwinFPV "Cement" Ultra Durable F7-100A Waterproof Stack

$132.98
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

Stonehobby

View Store

Specifications:  FC :  MCU: STM32F722Gyroscope: MPU6000/ICM42688OSD: AT7456EBlack box: Built-in 8G SD cardBEC output: 10V/3A 5V/3AReserved interface: 5x Uarts(1,2,3,4,6), 4x Softserial, 1x I2C, 4x RGB, 1x Buzzer, 1x USER(C09)Input voltage: 2-6S LipoFirmware name: DARWINF722HDV2Mounting hole: 30.5mm x 30.5mmDimensions: 39.5mm x 39.5mm x 4mmWeight: 10.1g±0.2g ESC:  MCU: 32-bit F4 120MHz main frequency, maximum support 128KHz PWM Packet RateContinuous / peak current: 100Ax4/120Ax4 (continuous 100A requires water cooling environment)Input voltage: 3-6S LipoSupport throttle signal: Dshot150/300/600/1200 MultiShot Oneshot42 Oneshot125Current sensor: support (current meter scale: 125)Firmware name: DARWIN_F4_60Power cord: 14AWG-120mm long (the ESC terminal and electrolytic capacitor have been welded at the factory)Power plug: XT60Dimensions: 36.8mm x 42.5mm x 7.5mmMounting hole: 30.5mm x 30.5mmWeight: 23.0g±0.2g (excluding capacitors and power cords)Apply for: 5-10 inch FPV Drones Packing list:  FC:  1 x DarwinFPV "Cement" Ultra Durable F7 Waterproof Flight Controller 1 x 30mm ESC cable (8P) 1 x 65mm analog VTX cable (4P) 1 x 65mm GPS cable (6P) 1 x 65mm receiver cable (4P) 1 x 65mm HD VTX cable (6P) 4 x M3*4.5mm shock-absorbing balls (installed on FC) 1 x sticker ESC: 1 x DarwinFPV "Cement" Ultra Durable 100A Waterproof ESC 1 x 30mm ESC cable (8P) 1 x XT60 1 x 14AWMG power cable with a length of 120mm (soldered to the ESC) 1 x 35V/1000uF electrolytic capacitor (soldered to the ESC) 4 x M3*6.6mm shock-absorbing balls (installed on the ESC) 1 x sticker Stack: 1 x DarwinFPV "Cement" Ultra Durable F7-100A Waterproof Stack 1 x 30mm ESC cable (8P) 1 x 65mm analog VTX cable (4P) 1 x 65mm GPS cable (6P) 1 x 65mm receiver cable (4P) 1 x 65mm HD VTX cable (6P) 1 x XT60 1 x 14AWMG power cable (length 120mm, soldered to the ESC) 1 x 35V/1000uF electrolytic capacitor (soldered to the ESC) 4 x M3*4.5mm shock-absorbing balls (installed on FC) 4 x M3*6.6mm shock-absorbing balls (installed on the ESC) 4 x M3*25 hexagon socket head black 304 screws (installed on the stack) 4 x M3 nylon nuts 1 x sticker

Show More Show Less