Amerec AK Series 7.5kW Steam Shower Generator, 208V

Amerec AK Series 7.5kW Steam Shower Generator, 208V The Amerec AK7.5 is engineered for home and day spa steam baths up to 200 adjusted cubic feet (ACF). Constructed of corrosion-resistant stainless-steel, the Amerec AK7.5 steam shower generator provides years of dependable, worry-free operation. The AK7.5 includes professional-grade heating elements, modular snap-in control connections, durable electronic components and parts, electronic water level control system, and a variety of other innovative features. Amerec AK Series steam generators are designed to provide the most consistent steam production and temperature for a relaxing steam bath. The AK 7.5 uses a Sequential Temperature Control which provides a consistent flow of soft steam without unexpected temperature variations. The Amerec AK7.5 steamer’s stainless-steel tank and water probes deliver long-lasting strength and durability. The AK7.5 steam shower unit is equipped with removable heating elements for easy and economical service. Homeowners, health clubs, and day spas rely on Amerec AK Series steam generators for long-lasting safety, reliability, and efficiency. The Amerec AK7.5 7.5kW steam generator is available in 240Vor 208Vand can be field wired for single-phase or three-phase (PH) configurations. The Amerec AK7.5 generator requires the available K3 control for operation which regulate bathing duration and temperature, or the R30K 30-minute timer. Each control package comes with a matching finish ComfortFlo steam head. We recommend the available Amerec ADK Automatic Drain System with your AK7.5 steam unit which drains the generator tank after each use to help prevent calcification and lime build-up of the unit. Amerec AK Series generators can be linked together to heat steam shower enclosures larger than 550 cubic feet. Connection cables are sold separately, and each generator requires a ComfortFlo steam head. The Amerec AK7.5 steam bath generator carries a limited lifetime warranty and is fully serviceable. All Amerec steam room generators are UL, CSA, and CE listed for your safety.  Includes 7.5KW steam bath generator Installation and operation manual Limited warranty Features Sequential temperature control for consistent flow Stainless steel tank Industrial grade, serviceable heating elements Durable electronic components Electronic water-level control system Low voltage safety control circuits Available Auto Drain automatic draining system Ability to field wire for 1-phase or 3-phase phase Ability to connect multiple generators to heat steam baths larger than 550 cubic feet Operates with inside/outside shower, on/off, time/temperature controls Full 3/4" port drain valve ASME safety valve UL/CSA/CE listed Specifications Model       AK7.5 Minimum Adjusted Cubic Feet      80 Maximum Adjusted Cubic Feet      200 Kilowatt Rating (KW)      7.5 KW Shipping Weight (Lbs.)      35 lbs AC Voltage      240V AC DC Voltage      5V DC Phase      Single Phase Nominal Amperage      31 Amps Recommended Protective Device      40 Amp Recommended Minimum Copper Wire Supply      8 AWG Water Supply Connection      3/8" NPT Generator Steam Line Connection      1/2" NPT Steam Head Connection      1/2" NPT Drain Connection      3/4" NPT Safety Relief Valve Connection      3/4" NPT Safety Relief Valve PSIG      10 PSIG Control "Rough In" Cut Out      2-3/8" Diameter Control Sensor Cable      25', 2 Conductor, 22 AWG, Shielded Cable Control Sensor "Rough In" Cut Out      7/8" Diameter Generator Control Connection     8 Pin, Snap-In Connector Generator Control Cable     25', 8 Conductor, 28 AWG, Shielded Cable Width In Inches     16-1/2" Depth In Inches     6-1/4" Height In Inches     15" Warranty Amerec warrants that Amerec Steam Boilers and Temperature Controls (warranted products) are free of manufacturing defects both as to workmanship and material and will replace or repair defective parts or equipment for the period of time and in accordance with the conditions set forth below: 1. Applicability: This warranty applies when the warranted product (a) is installed in accordance with installation instructions provided, (b) is properly installed and reasonably maintained, and (c) has not been subjected to damage, misuse, or abuse. 2. Registration: This warranty becomes valid only after the Limited Warranty Registration form, provided with this warranty, is completely filled out and signed by the original purchaser and sent to Amerec within sixty (60) days from the date of original installation. This warranty is non-transferable and shall extend only to the original installation. 3. Duration of Warranty: Amerec or its authorized representative will provide parts to replace those with manufacturing or workmanship defects for a period of one (1) year from the date of original installation. 4. Return Authorization: A return authorization number assigned by an Amerec representative must accompany all returned parts. Parts which are returned without a return authorization number may not be repaired or replaced. 5. Procedure: Requests for repair or replacement, a return authorization number, or warranty information should be directed to AMEREC by calling toll-free 1-800-363-0251, by email to support@amerec.com or by writing to AMEREC, 575 Cokato St. E, Cokato, MN 55321. Defective product or parts returned for repair or replacements must be shipped to Amerec at below address. Shipping costs for return of replacement product or parts to the purchaser will be at the expense of the purchaser. 6. Limitations and Remedies: There are no warranties which extend beyond the descriptions of the face hereof. This limited warranty is in lieu of all warranties, expressed or implied, and of all other obligations or liabilities on the part of Amerec. There shall be no implied warranty of merchantability. Amerec neither assumes nor authorizes any person top assume for it any other obligation or liability in connection with the sale of its products. Damages for breach of this warranty shall not exceed the lesser of the cost of repair or replacement shall be the exclusive remedy to the purchaser. Under no circumstances shall Amerec be liable by virtue of this warranty or otherwise for any special, indirect, secondary, incidental, or consequential damage of any nature to any person or property arising directly or indirectly out of the use of this or inability to use a warranted product. Some states do not allow limitations on how long a implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. 7. Disputes: Any lawsuit alleging breach of this limited warranty shall be commenced within one (1) year from the date of breach. In addition, any such lawsuit may be commenced only in Wright County, Minnesota.