Amerec KT3 Digital Steam Shower Generator Control Kit, AK Series

Amerec KT3 Digital Steam Shower Generator Control Kit, AK Series The Amerec KT3 steam shower generator control kit works with Amerec AK series steam generators. A stylish update to Amerec's KT60 control, this digital control panel is backward compatible with the classic KT60. Featuring a built-in temperature sensor, this control was designed for use inside the steam room. With the simple ease of 3-buttons, you control on/off, temperature, and time duration settings. The display alternates every 5 seconds between atmospheric room temperature and the remaining time of your steam session. Maximum session settings are up to 125 °F and 60 minutes (residential use). The K3 control kit includes a control cable and ComfortFlo steam head, which is available in a variety of designer finishes to match your fixtures. For a temperature-controlled steam bath, Amerec AK-Series generators require either a KT3 with a built-in temperature sensor or a K3 with a separate temperature sensor. An Amerec K3 may be added to allow two controls for a steam bath, such as one inside the room and one outside, but if a KT3 is installed it must be inside the steam room. A maximum of two controls may be installed. The temperature can be adjusted from 84 to 125 °F (29 to 52°C) with an initial default of 120 °F (49°C). The temperature display preference may be set using a jumper on the steamer circuit board to select either °F (default) or °C. The maximum bath time may be set to 60 minutes (default) or 24 hours (for light commercial use) using a jumper on the steamer circuit board. This control must be mounted inside the steam room, approximately 4 feet up from the floor, as it contains the temperature sensor. A second K3 control may be installed outside the steam room for added convenince. Either control may be used to control the steam bath. The low voltage controls can be mounted up to 25 feet from the steam generator. This control must be mounted inside the steam room so its built-in temperature sensor will function. String the 25-foot cable from the control location through 1/2” holes in the wall studs or ceiling joists to the generator.  Includes KT3 Control Control Control Cable Installation and operation manual Limited Lifetime Warranty ComfortFlo Steamhead Steamhead Installation and operation manual Limited Lifetime Warranty Features KT3 Control Black control display panel Settable on/off, time, temperature, and delay Settable temperature range of 84-125 °F Inside steam room installation Displays and room temperature Built-in temperature sensor Designed, engineered, and made in the USA Control Console Dimensions: 3"W x 0.5"D x 3"H Limited Lifetime Warranty ComfortFlo Steamhead Safe operation Integral reservoir for a scented steam bath 1/2” NPT connection 180º steam dispersion pattern 6 designer finishes available Designed, engineered, and made in the USA Steamhead Dimensions: 3"W x 1.4"D x 2.75"H Limited Lifetime Warranty Specifications Model        KT3 KT3 Control Minimum Temperature Setting       84°F Maximum Temperature Setting       125 °F Minimum Session Timing      5 minutes Maximum Session Timing      60 minutes(Residential) 24 Hour(Light Commercial with  jumper use) Installation      Wall-mount Inside Steam Room Width      3" Depth      0.5" Height      3" ComfortFlo Steamhead Steam Head Connection       1/2" NPT Width       3" Depth       1.4" Height       2.75" Assembly and Operation Manual Assembly and Operation Manual Warranty Amerec warrants that Amerec Steam Boilers and Temperature Controls (warranted products) are free of manufacturing defects both as to workmanship and material and will replace or repair defective parts or equipment for the period of time and in accordance with the conditions set forth below: 1. Applicability: This warranty applies when the warranted product (a) is installed in accordance with installation instructions provided, (b) is properly installed and reasonably maintained, and (c) has not been subjected to damage, misuse, or abuse. 2. Registration: This warranty becomes valid only after the Limited Warranty Registration form, provided with this warranty, is completely filled out and signed by the original purchaser and sent to Amerec within sixty (60) days from the date of original installation. This warranty is non-transferable and shall extend only to the original installation. 3. Duration of Warranty: Amerec or its authorized representative will provide parts to replace those with manufacturing or workmanship defects for a period of one (1) year from the date of original installation. 4. Return Authorization: A return authorization number assigned by an Amerec representative must accompany all returned parts. Parts which are returned without a return authorization number may not be repaired or replaced. 5. Procedure: Requests for repair or replacement, a return authorization number, or warranty information should be directed to AMEREC by calling toll-free 1-800-363-0251, by email to support@amerec.com or by writing to AMEREC, 575 Cokato St. E, Cokato, MN 55321. Defective product or parts returned for repair or replacements must be shipped to Amerec at below address. Shipping costs for return of replacement product or parts to the purchaser will be at the expense of the purchaser. 6. Limitations and Remedies: There are no warranties which extend beyond the descriptions of the face hereof. This limited warranty is in lieu of all warranties, expressed or implied, and of all other obligations or liabilities on the part of Amerec. There shall be no implied warranty of merchantability. Amerec neither assumes nor authorizes any person top assume for it any other obligation or liability in connection with the sale of its products. Damages for breach of this warranty shall not exceed the lesser of the cost of repair or replacement shall be the exclusive remedy to the purchaser. Under no circumstances shall Amerec be liable by virtue of this warranty or otherwise for any special, indirect, secondary, incidental, or consequential damage of any nature to any person or property arising directly or indirectly out of the use of this or inability to use a warranted product. Some states do not allow limitations on how long a implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. 7. Disputes: Any lawsuit alleging breach of this limited warranty shall be commenced within one (1) year from the date of breach. In addition, any such lawsuit may be commenced only in Wright County, Minnesota.