Ford Emblem Camera & 4.3" Mirror

Ford F150, F250, F350 backup camera & 4.3" Mirror SKU: FECC-43 Ford F150, F250, F350 backup camera - OE fit, includes 4.3" LCD & emblem camera OEM factory emblem camera for Ford F-Series truck F150, F250, F350 backup camera with Night Vision Technology and Parking Guidance Lines OEM Ford Bezel, replaces factory tailgate emblem This will fit any Ford with the large blue oval in the center of the tailgate (2005 and up). Kit includes: Factory OEM Tailgate Emblem & Camera Mount CCD night vision camera pre-mounted 22 Foot Male to Male RCA Video Cable with reverse power output trigger wire OEM Grade 4.3-inch Rearview Mirror Monitor with 2-Way Video-In,  with 1 Video auto-trigger switching for back-up camera VSM-A mount is attached to mirror Mirror measures 10-1/4 inch  Factory Ford tailgate nameplate/camera mount Factory Ford blue oval emblem Camera with night vision technology and selectable distance lines OEM Ford mounting bolts Detailed installation instructions Camera Specifications: Factory Style Custom Ford Camera (CMOS III) Super CMOS Sensor with Night Vision Technology 22 Foot Male to Male RCA Video Cable with reverse power output trigger wire Mirror Image Selectable Parking Guidance Line Engineered ABS Housing Resolution (TV LINES): 580 Minimum illumination: <0.1Lux Angle: 170° Working Voltage: 9-16V Operating Temp: -22-+176°F Water-proof: IP67-IP68 Video System: NTSC (Color)   This kit allows you to see what is directly behind the truck - it will even see the rear bumper and hitch.  Installation Information: Your factory tailgate blue oval is held on with two sided tape, use a heat gun and fishing line to work the old emblem off the surface of the tailgate. On older models you will need to drill an access hole for the camera to pass through the surface of the tailgate. On the bottom of the tailgate there is a square water drain that can be used to pass camera harness through. Most 2006 and newer models may already have the required holes so no drilling would be required in this case. The wire harness has a single point weather resistant connection that connects to the camera near the spare tire under the truck - allows for easy tailgate removal! The camera harness is 22' long so all connections can be made inside the cab.