
TL3A Precision Thermometer
TL3-A (Please note - Thermoprobe products are built to the order and usually require 12 to 14 business days to ship to our warehouse.) The ThermoProbe TL3-A intrinsically safe thermometer is intended to be used anywhere a precision glass stem thermometer or other type thermometer may be used. The TL3-A series replaces the TL1-A series of Thermoprobe thermometers. Please note that additional lengths are available. Please call for price and lead times. This precision thermometer is an improved version of the original ThermoProbe model TL1. The TL1-A cordless thermometer incorporates glass thermometer simplicity and reliability with the ease of a digital display. Like precision mercury thermometers, the ThermoProbe TL1-A has accuracy, repeat-ability and long-term stability. But unlike those precision thermometers there will never be problems with mercury separation or hazardous material cleanup. Different from most electronic thermometers, the "Cordless" TL1-A has no wires to get in the way or break. Battery replacement is easily done through a sealed cover. Encoded calibration is unaffected by temperature, vibration, or battery removal. This cordless thermometer features a low battery display, and failure mode indications protect the user from false data. 4 Point NIST Traceable Calibration and a one year warranty included. Key Features Auto-off after 20 minutes to save battery life Minimum reading Maximum reading Averaging Easy °F to °C switching Display arrows indicate increasing or decreasing temperature activity Due to the special calibration on these meters, please allow approximately 7 to 10 days to ship. Includes certificate of calibration at the following approximate points: 32, 120, 199 (200) and 300 degrees F. We can also certify at 115 degrees F for an extra charge (See Options) Specifications Display: LCD with 0.25 inch charactersTrend Indicating ArrowsLow Battery & Fault indication User Functions: Auto Off after 20 minutes or continuous operationLowest Reading, Highest Reading, Average ReadingSwitchable in Units of °F or °CDisplay tenths or hundredths resolution Construction: Stainless Steel temperature sensor; Standard Sensor length 8" (20cm)Standard diameter 1/4" (6.35mm) with reduced diameter tip of 3/16" (4.76mm)Sensor mount acetyl plasticElectronics and display in 3.5" x 1.2" anodized Aluminum enclosureMolded Silicone seal.Highly durable display window, graphics and membrane switches. Weight: 3 ounces, 93 grams Temperature: Resolution 0.01 DegreesCalibrated Accuracy:±0.1 °F from 14 to 320 °F±0.06 °C from -10 to 160 °CNIST Traceable Report of Test Temperature Time Constant: 8 seconds in circulated water bath(63.2% response to temperature change) Electronics: Microcontroller and precision 20 bit A/D ConverterFLASH memoryRecommended Temperature Range For best Accuracy 32 to 112 °F, 0 to 44 °C100 Ohm, Class A Platinum RTDImmersion depth 4", 11cm Sensor: 100 Ohm, Class A 1/3 DIN RTDImmersion depth 4", 11cm Battery: 20mm Coin Size 3V Lithium, Duracell Type CR2032Over 100 hours Service Life at 70 °F, 21 °CBattery Operating Range -4 to 130 °F, -20 to 54 °CNote: Battery may not provide adequate power if ambient temperature is below -4 °F, -20 °C or above 130 °F, 54 °C Specifications subject to change Typical Applications Temperature baths, melting point tests, flash point tests, reference, thermowells, provers, temperature calibration for flow meters. Industries: LaboratoryPetroleumPipelinePharmaceuticalFood