TP9A Petroleum Gauging Thermometer
MANY OTHER VERSIONS AVAILABLE. PLEASE CALL 800-390-0004 FOR PRICING ON MODELS NOT LISTED. (Please note - Thermoprobe products are built to the order and usually require 10 to 12 business days to ship) The TP9A employs the proven RTD design that has been used in the TP7 and TP8 for many years. A sealed industrial quality overlay provides a user interface that is easy to use with gloves. A stainless steel enclosure protects the circuit board and large LCD from penetration by impact, water and reactive liquids. The new TP9 circuit board is an evolutionary step up from our highly accurate, reliable and successful TL1 laboratory thermometer. The Power Button’s primary function powers the instrument for intervals of about 20 minutes since the last button was accessed. The Power Button can also be used to conserve power and clear the memory, or to make adjustment while in calibration mode. A simple menu operation is displayed by holding the Function Button, and alternately functions to allow adjustments in the calibration mode. Arrows on the left side of the display show the direction of the temperature reading and whether stability has been reached. At the user’s discretion stabilized temperatures can be logged at numerous liquid levels for a running average and later displayed for the user’s documenting purposes. But this feature never interferes with simply getting an accurate temperature reading. To endure the environment and be intrinsically safe, the TP 9 is manufactured of materials, which are both immune to petrochemicals and are non-sparking. The enclosure is made of stainless steel. The probe assembly is constructed using non-stick cable and stainless steel sensor components. Part Number Codes SW Standard Weight Sensor, 0.25 lb (0.11 Kg) EW Extra Weight Sensor, 0.50 lb (0.23 Kg) AW Asphalt Weight Sensor, 0.75 lb (0.34 Kg) RC Railcar (NO) Weight Sensor, for railcar tank openings SM Standard Cord Markings (5 ft) MM Metric Cord Markings (1 M) NM No Cord Markings Cord Length is in Feet except M, which is in Meters Note that almost any combination of the codes may be ordered. Please call for pricing if you don't see what you're looking for. Specifications Maximum Dimensions: 10"L x 4.25"H x 6.4" W Probe 304 Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or PFA Cable Jacket, Coaxial Construction Enclosure Material: Stainless SteelAcetal (Delrin) Probe HolderPolyvinylchloride FaceplateStainless Steel Fasteners Batteries: 2 AA Alkaline; Battery Life of approximately 200 hoursBattery manufacturer’s battery operating temperatature range -4 to 130 °F, -20 to 54 °CNote: Battery may not provide adequate power if ambient temperature is extremely low or high. Temperature Accuracy: : Resolution 0.01Range: -40 to +400 °F -40 to +204 °CCalibrated Accuracy: ±0.2 °F from 32 to 200 °F ±0.5 °F from 200 to 400 °F ±0.1 °C from 0 to 100 °C ±0.3 °C from 100 to 200 °C4 Point NIST Traceable Report of TestLong-term drift not to exceed 0.05%/yearMeets API requirements Specifications subject to change