LogTag TREX-8 Multi-Use Temperature Logger with External Probe

TREX-8 Interchangeable External Probe with high quality gold plated connector 8000 reading memory capacity with up to 3 year battery life 'OK' & 'ALERT' Indicator with high and low alarms Industry best download time - less than 5 seconds for full memory IMPORTANT:  Each location (not each logger) requires a LogTag Cradle in order to program and retrieve data from the logger.   The LogTag® TREX-8 is a versatile, wide range, multi-trip Temperature Recorder with interchangeable External Probes, featuring high resolution temperature readings over a measurement range of -40°C to +99°C (-40°F to +210°F). Interchangeable Remote Probes – LogTag remote temperature probes are interchangeable provided they are changed with LogTag ST100 type remote temperature sensors.  Please note that this logger requires one external probe per logger, and one cradle per facility. Using the LogTag® Interface Cradle and the freely available companion software LogTag® Analyzer, the LogTag® TREX-8 is easily set-up for recording conditions including delayed start, sampling interval, number of readings, continuous or fixed number of readings and configuration of conditions to activate the 'ALERT' indicator. Probes  Remember, a probe is required for this Logger.  Specifications  Model TREX-8 External Sensor Measurement Range -40°C ~ +99°C  (-40°F ~ +210°F) Recorder Operating Temperature Range -40°C ~ +85°C  (-40°F ~ +185°F) Resolution < 0.1°C for -40°C ~ +40°C, < 0.2°C for +40°C ~ +80°C Accuracy With recorder case sitting in environmental temperature between 0°C ~ 50°C the rated accuracy is: Better than ±0.5°C for -10°C~ +40°C Better than ±0.7°C for -10°C~ -30°C & +40°C~+60°C Better than ±0.8°C for -30°C~ -40°C & +60°C~+80°C Better than ±1.0°C for +80°C~+99°C Sensor Reaction Time T90 typically less than 2 minutes in moving air (1m/s) for ST100T,ST100H & ST100S types. Capacity 8032 readings (16K bytes memory) Sampling Frequency Adjustable, 30 seconds to several hours Logging Start Options Push button start or specific date & time. Recording Indication Flashing 'OK' indicator / flashing 'ALERT' indicator. Download Time Typically with full memory (8000 readings) in less than 5 secs depending on computer or readout device used. Environmental IP61 Power Source 3V LiMg battery Battery Life 2 ~ 3 years of normal use (based on 15 minute logging, download data monthly. Size 86mm(H)x54.5mm(W)x8.6mm(T) Weight 35g Standard external sensor cable lengths Standard: 1.5m (4’11”) Extended: 3 m (9’10”) (recommended maximum) External Sensor Cable Type PTFE (FDA food contact rated) coaxial Case Material Polycarbonate Other Features • Logging start by push button or specific date/time start • Optional clearing of alert indication by push button (places inspection make at same time). • Download inspection mark recorded in LogTag memory every time LogTag is downloaded. • 'Prestart' fail-safe logging (records temperature data even if not started) • Low Battery indication in software. • Comprehensive Alert indicator configuration. • Calibration to achieve higher accuracy possible.