Dataram 16Gb Ddr3 Sdram Memory Module Dtm64385F

Dataram 16GB DDR3 SDRAM Memory Module DTM64385F is a registered 2Gx72 memory module, which conforms to JEDEC's DDR3, PC3-12800 standard. The assembly is Dual-Rank, with each rank containing eighteen Samsung 1Gx4 DDR3-1600 SDRAMs.One 2K-bit EEPROM is used for Serial Presence Detect and a combination register/PLL, with Address and Command Parity, is also used. Both output driver strength and input termination impedance are programmable to maintain signal integrity on the I/O signals in a Fly-by topology. A thermal sensor accurately monitors the DIMM module and can prevent exceeding the maximum operating temperature of 95C. 240-pin JEDEC-compliant DIMM, 133.35 mm wide by 30 mm high Operating Voltage: 1.5V ±0.075 I/O Type: SSTL_15 On-board I2C temperature sensor with integrated Serial Presence Detect (SPD) EEPROM Data Transfer Rate: 12.8 Gigabytes/sec Data Bursts: 8 and burst chop 4 mode ZQ Calibration for Output Driver and On-Die Termination (ODT) Programmable ODT / Dynamic ODT during Writes Programmable CAS Latency: 6, 7, 8, 9, 10, and 11 Bi-directional Differential Data Strobe signals Product Type: RAM Module Environmentally Friendly: Yes Environmental Certification: RoHS Brand Name: Dataram Form Factor: DIMM Length: 5.3" Manufacturer: Dataram Corporation Product Name: 16GB DDR3 SDRAM Memory Module Manufacturer Part Number: DTM64385F Manufacturer Website Address: http://www.dataram.com Number Of Pins: 240-pin Thickness: 155.1 mil