Temank PWM MPPT Solar Charge Controller T20 20A AWG8
Brand: Temank Product Model: T20 Charge Model: PWM/MPPT LCD screen display Easy operation interface MPPT+ PWM charging mode Parameter user can reset Overload A key to restore the factory settings A key to open and close the load USB 5V charging (for 500mA) for mobile phone(Only for M30) Dual Timer function Introduction:This is a three-time controller into the evening working time,an interval of rest of pause time,Dawn working time(morning light function), the user can according to their needs,set a different time. This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving, he not only has efficient MPPT controller charging function to automatically track the maximum power point, 10% -30% higher than the ordinary controller charging efficiency, also has standby energy saving, more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA. Protect function Battery reverse discharge protection Battery reverse polarity protection Battery under voltage protection Short-circuit protection Automatic temperature compensation function Data Sheet Parameters / Model T10 T20 T30 T40 Maximum power current 12A 20A 30A 40A Installation Lin（mm2） 4mm2 8mm2 10mm2 12mm2 Installation Line(AWG) 10(AWG) 8(AWG) 7(AWG) 6(AWG) Weight 280g 300g 475g 480 Dimensions 143×89×46（mm） 187*97*61（mm） System load loss ≤13mA Loop Buck ≤100mV Temank PWM MPPT Solar Charge Controller T20 Specification Battery float voltage 13.8V（12V system）/27.6V（24V system） Battery （under voltage) protection 10.6V（12V system）/21.2V（24V system） Battery (under voltage) recovery voltage 12.6V（12V system）/25.2V（24V system） Charge mode MPPT+PWM MODE Operating Temperature -10℃~60℃ Storage Temperature -30℃~70℃ Humidity requirements ≤90％, No condensation Temperature compensation -4mV/Cell/℃ Temperature Probe (built components) NTC 100K thermistats Maximum open circuit voltage of the solar panel 18V-24V（12V system）36V-48V（24V system) Solar panels maximum open circuit voltage (V) ≤48V (Cases) 12V system standard configuration The peak voltage of the solar cell panel 18V-25V 18V-25V 18V-25V 18V-25V Peak power of solar cell panel 50W-130W 100W-260W 200W-380W ≤500W Model T10 T20 T30 T40 Battery standard voltage 12V 12V 12V 12V Battery capacity ≥100AH ≥200AH ≥300AH ≥400AH Installation Lin（mm2） 4mm2 8mm2 10mm2 12mm2 Installation Line(AWG) 10(AWG) 8(AWG) 7(AWG) 6(AWG) There is detail information about Temank PWM MPPT Solar Charge Controller T20 12V AWG8 From Factory directly as below: Temank PWM MPPT Solar Charge Controller T20 12V 20A AWG8 download