Aquarius Bright Discharge Mixing White - Low Viscosity ZF

Aquarius™ Bright Discharge White LV ZF is designed to be mixed with Bright Discharge Base to obtain thousands of Pantone® approved colors.  Aquarius™ Bright Discharge ZF range consists of a high opacity soft hand discharge white and a soft, bright discharge base. Designed to achieve bright discharge white and colors whilst maintaining a super soft flexible hand. Benefits Complete water based ink portfolio Includes extensive range of special effect pastes Enhanced on press performance Universal pigment system Supported by IMS Formulation software Brand RSL compliant ADDITIVES Aquarius™ Discharge Activator ZF 6% Max Aquarius™ Softener 1-5% Aquarius™ Thickener 0.1-1% Aquarius™ Retarder Gel 1-5% PRINTING TIPS Use 6% Aquarius™ Discharge activator ZF. Mix well and leave for 10 minutes to dissolve. Remix immediately prior to adding to the screen. Once activated inks colors should be used within 8 hours to prevent any color change issues. To prevent wastage only activate a small amount of color at a time. Use with 100% Cotton Dischargeable fabrics. White can be used as stand alone white, as an underbase for plastisol colors or as a highlight white Colors should be made in accordance with Aquarius™ IMS Pantone® mixing system with a maximum of 6% pigment loading to ensure crock performance is maintained. Use 86-230T/34 (34-90T) mesh for best performance and color brightness Avoid the use of flash cures. Print discharge colors dark to light, wet on wet. Print Aquarius™ Bright Discharge White in the last position. Prints should be cured at 330o F/165o C for 90 seconds. Check the cure temperature at the ink surface.