Audio Technica - AT-LP5X Manual Direct-Drive USB/Analog Turntable

The AT-LP5x features upgraded technology, including a direct drive, 3-speed (33-1/3/45/78 RPM) motor, MM/MC phono pre-amp and USB capability, which are all housed in a mass damped high-density polymer cabinet. Committed to a Permanent Quest for Quality - High-Fidelity HeritageBorn of Audio-Technica's rich analog heritage, the AT-LP5X incorporates a J-shaped tonearm that takes its inspiration from the classic A-T models of the 1960s and '70s.• Plays 33-1/3 RPM, 45 RPM and 78 RPM Records• Built-in Switchable Phono Pre-amplifier• J-shaped Tonearm• AT-VM95E Dual Magnet Phono CartridgeUpgraded Features - Latest Technology, Contemporary StyleThis next-generation LP5 turntable pushes the acclaimed performance of its predecessor to new heights, with upgraded features like the versatile AT-VM95E cartridge and a preamp gain switch to accommodate both moving magnet and moving coil cartridges.Building on Audio-Technica's analogue heritage and over 50 years of Japanese audio design, the AT-LP5x features upgraded technology while keeping the contemporary style and acclaimed performance of its predecessor, the AT-LP5.The LP5x retains the J-shaped tonearm, a design inspired by the classic Audio-Technica models of the 1960s and '70s, and features a metallic gimbal suspension system and precision bearings to mitigate tracking errors. The tonearm also includes an adjustable counterweight and anti-skate control and comes fitted with a lightweight (9.3g) AT-HS6 headshell and the black AT-VM95E Dual Moving Magnet stereo cartridge.Constructed of anti-vibration damping materials with heavy-mass metal chassis inserts, the AT-LP5x turntable has been designed to limit low-frequency acoustical feedback. Its precision-machined, die-cast aluminum platter is powered by a direct-drive, low-noise motor, ensuring stable, on-axis rotation at 33-1/3, 45 and 78 RPM. A 5 mm thick rubber-damping mat, which isolates from low frequency feedback while providing a highly stable surface for all LP formats, tops the platter.The AT-LP5x features a built-in switchable MM/MC phono/line preamp that enables it to connect directly to a computer, home stereo, powered speakers and other components that have no dedicated turntable input. The selection of MM/MC cartridges allow for an easy upgrade to a moving coil with additional equipment. The turntable is also equipped with a USB output for direct connection to a computer.- AT-VM95E Cartridge -This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge's special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws - no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.Features• VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus• Aluminum cantilever• Specially wound coils increase output voltage• Durable low-resonance polymer housing• Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws - no nuts required• Compatible with any AT-VMN95 replacement stylus- AT-HS6 Headshell -9g headshell aluminium die cast body.AT-HS6 9g headshell aluminium die cast body - Die-cast aluminium body, Integral finger lift, Includes terminals quad wire and 1 pair of 10mm screws and 1 pair of 8mm screws.The AT-HS6 is a universal 1/2"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws. Available in black (AT-HS6BK) and silver (AT-HS6SV). Audio-Technica AT-LP5X Features Direct-drive, low noise motor Fully manual operation with three speeds: 33-1/3, 45 and 78 RPM AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus Lightweight AT-HS6 headshell J-shaped tonearm, modeled after original Audio-Technica designs from the 1960s and '70s, are engineered to minimize tracking errors Switchable MM/MC built-in pre-amplifier and line enables connection to components with or without a dedicated phono input Anti-resonance, die-cast aluminum platter Heavy rubber damping mat for improved low-frequency reproduction AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Elegant matte black finish Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable Included dust cover and mounting hardwareKey Features Direct-drive, low noise motor Fully manual operation with three speeds: 33-1/3, 45 and 78 RPM AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus Lightweight AT-HS6 headshell Anti-resonance, die-cast aluminum platter Heavy rubber damping mat for improved low-frequency reproduction AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Elegant matte black finish