Zooz 2 Channel NO & NC Accessory Relay ZAC98 (12-24 V Input)

Track Signal Input PRODUCT HIGHLIGHTS Connect any 12-24 V signal input to trigger a dry contact output (do NOT connect 120 V to the inputs!) NO (normally open) and NC (normally closed) available on both input and output terminals Great for alarm panel or sprinkler system tracking Use it with ZEN16 MultiRelay dry contact inputs for Z-Wave capability 1-year warranty NOTE: This is NOT a Z-Wave device. You need a compatible Z-Wave relay for wireless control. INSTALLATION Always turn off the power at both the signal input device and the output load device. Use the appropriate wire gauge for voltage used. Connect the low-voltage signal output wires from your low-voltage device to the input terminals on the ZAC98 relay. Connect the controlled load to the input terminals on the ZAC98 relay. Always use the appropriate pair of terminals together (so either NO on both sides or NC on both sides). When using with ZEN16, connect the NO output terminals on the ZAC98 with the Sw terminals on the