Zooz Z-Wave Plus 700 Series XS Tilt | Shock Sensor ZSE43

Enhanced Security PRODUCT HIGHLIGHTS DO NOT BUY IF YOU LIVE IN THE U.S.! THIS LISTING IS FOR THE NEW AU/NZ VERSION AND THE PREVIOUS 700 SERIES VERSION ONLY. CLICK HERE FOR THE NEW 800 SERIES LONG-RANGE SENSORS FOR THE US REGION!   Tilt monitoring for garage doors and gates: quick open/close reports you can depend on sent to your Z-Wave system for both vertical and horizontal tilt movement (NOT suitable for swinging gates or doors) Shock sensor: monitor window glass and other surfaces for vibration to improve security of your home Extra small: perfect for discreet unobtrusive installation Safety coat: rubber oil protects against corrosion and water leak damage New 700 series Z-Wave chip: more range (you'll need it in the garage!), faster reports, more stable connection Outdoor use: use the dedicated waterproof cover case (sold separately) to install the sensor outside if needed Runs on a single CR2032 battery (Energizer, Panasonic, or Maxell recommended. Do NOT use Duracell batteries due to the extra bitter coating that prevents contact.) Equipped with SmartStart for extra secure inclusion  CHECK HUB COMPATIBILITY BEFORE BUYING (DOESN'T WORK WITH ALARM PANELS)  5-year warranty and lifetime tech support Check out ZSE43 Frequently Asked Questions NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product. PRODUCT CONDITION We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device: NEW: brand new product, as delivered by the factory OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, battery may not be full, etc); hardware and firmware version may be different than the brand new device description USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, batteries, or mounting hardware) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description Z-WAVE FREQUENCY This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency / region as your hub when buying Z-Wave devices for them to include to your system. If you're not sure which frequency your hub operates on, please contact your solution provider first. Here is what each option stands for: US/CA/MX: 908.42 MHz (used primarily in US, Canada, and Mexico, the default option for all products) EU/UK: 868.42 MHz (used primarily in Europe) AU/NZ: 921.4 MHz (used primarily in Australia and New Zealand)  How It Works Monitor your garage doors for the peace of mind you always wanted. Pair your sensor with the Zooz MultiRelay for a complete smart garage door solution. Always know what's happening on the main entry points to your home. Watch for vibration on your window glass, sliding doors, and other surfaces to take action when needed. Set alerts for when you're not around so that you're quickly notified of any unusual activity. This sensor features the highest Z-Wave security level and is backed by a 5-year manufacturer warranty which makes it a safe choice for your smart home monitoring needs. Installation To add the XS Tilt | Shock Sensor to your Z-Wave network:1. Use the included triangle tool to carefully open the sensor’s cover and access the battery. Pull the tab from under the battery to activate the sensor. Don’t close the cover just yet. The LED indicator will start blinking for around 10 seconds once thesensor is powered. 2. Bring the sensor to the location where you plan to mount it at.3. Put your Z-Wave hub into inclusion/pairing mode.4. Scan the QR code or enter the PIN code located inside of the battery cover if your hub supports SmartStart S2 inclusion.5. Click the Z-Wave button on the sensor 3 TIMES QUICKLY. The LED indicator will flash quickly.6. A new open/close and vibration sensor will appear on your controller’s device list.After successfully including the sensor into your Z-Wave network, use the supplied adhesive tape to mount it. If installing the sensor outdoors, please make sure to insert the sensor to the waterproof case (sold separately) and mount the case using the supplied mounting screws. GET THE WATERPROOF CASE HERE: WORKS WITH Z-Box Hub (recommended for Zooz products) eedomus Home Assistant (Z-Wave JS) HomeSeer (with Z-Wave Plus plug-in) Homey (Zooz App for Homey) Hubitat (2.3.0 or higher) Jeedom SmartThings (register your product here to access the custom lua driver for advanced functionality) NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product. SPECIFICATIONS Z-Wave Frequency: 908.42 MHz (US, CA, MX) / 921.4 MHz (AU, NZ) / 868.42 MHz (EU) - choose your region before adding this product to cart Z-Wave Chip: 700 series Power: 1 CR2032 battery (included) Wireless Range: Up to 130 feet line of sight Operating Temperature: 32° – 104° F Dimensions: 1.9” x 1” x 0.3” Installation: Indoor or outdoor use with waterproof case (sold separately) RESOURCES  Zooz Z-Wave Plus 700 Series XS Tilt | Shock Sensor ZSE43 User Manual (PDF) ZSE43 Frequently Asked Questions Advanced Settings Support Portal