Aimscorp 8000 Watt Modified Sine Inverter

FEATURES :    8000W max continuous power Modified sine wave Volt meter on front panel to monitor your battery voltage Amp meter on front panel to monitor your current use (rate at which battery is drained) Over Temperature LED indicator Over Load LED indicator AC direct connect terminal block On/off switch Over Temperature protection Over Load protection Single cooling fan thermally controlled Internally fuse protected AC output short circuit protection Auto reset on most fault conditions Aluminum case for optimal cooling Pre-wired for remote on/off switch Pre-slotted mounting plate Instruction manual Free 1 year tech support 1 Year Warranty Parts and Labor SPECIFICATIONS :  Continuous output power: 8000 Watts Surge power capability (peak power): 16000 Watts dc input / operating voltage: 10 to 15 Volts Output voltage: 120 Volts ac +/- 10% Output wave form: modified sine wave with phase correction Output frequency: 60 Hz +/- 1 Hz Battery low voltage alarm: 10.5 +/- 0.5 Volts Battery low voltage shutdown: 10.0 +/- 0.5 Volts No load current: < 1.3 DC amps Full load efficiency: 90% 1/3 load efficiency: 95% No load minimum operating temperature: 30ºF Full load maximum operating temperature: 140ºF AC Output Socket Type: quadruple Type 2 -3 prong High input voltage protection: 15V-17V Low input voltage shutdown: 10V Internal fuse protection Product size (L x W x H): 19.02”X 7.76”X 6.02” Weight: unit 19.8 lbs boxed 24 lbs UL maximum recommended per outlet 1500W This inverter requires 2 sets of 4 AWT cable if you are going to run at 8000 watts.