Pico Flex

This microcontroller+breakout board allows for easy QMK builds.Model can be found here: https://github.com/WainingForests/Skree-ControllersUSB-C cross link wither full duplex serial connection JST-SH connections for OLED screens, trackball sensors 3360 and 3389, encoders.Full support for my Skree flexible pcbs with the Skree Tail and thumbs connection for near zero soldering required for keyboard builds of a huge variety of sizes! This includes full RGB support!Code bits:Cross link connection for splits:#define SERIAL_USART_FULL_DUPLEX #define SERIAL_USART_TX_PIN GP0#define SERIAL_USART_RX_PIN GP1#define SERIAL_PIO_USE_PIO0#define SERIAL_USART_TIMEOUT     100  // USART driver timeout. default 100#define SERIAL_USART_SPEED 921600#define SERIAL_USART_PIN_SWAP Left right determination with solder jumper: (Solder jumper is marked JMP L/R) #define USE_SERIAL #define SPLIT_HAND_PIN      GP28  // high = left, low = right Flexible pcbs and thumbs connection: #define MATRIX_COL_PINS { GP10, GP9, GP11, GP12, GP13, GP14 } // C1-7 GP10, GP9, GP11, GP12, GP13, GP14, GP22 #define MATRIX_ROW_PINS { GP18, GP21, GP17, GP20, GP16, GP15 } // R1-7 GP18, GP21, GP17, GP20, GP16, GP19, GP15*AlwaysTR #define DIODE_DIRECTION COL2ROW Note TR is the thumbs row. Trackball: (See photo for layout on board)SCK = GP2MOSI = GP3MISO = GP4SS = GP5 RGB:Requires solder jumper LED (left and middle pad) Data = GP8Encoders: Encoder 1: A = GP6 B = GP7 Encoder 2:A = GP22 (swap for C7)B = GP8 (swap for RGB)