Icar Pro Bluetooth 4.0 (BLE) OBD2 Fault Code Reader OBDII Code Scanner Car Check Engine Light for Ios/Android

● WORK WITH MANY OBD2 APPS - Vgate iCar Pro Bluetooth Low Energy device works with most popular OBD apps such as Torque, Car Scanner, OBD Fusion, OBD Jscan, BimmerCode, etc which can turn your iPhone or Android phone/tablet into a sophisticated car scan tool. ● CAR COMPATIBILITY - 12V petrol vehicles made in the U.S. compatible with standard OBD2 protocols after 1996, 12V Light diesel vehicles with a load of 6.5T or less supporting the OBD2 protocols after 1996. Do not use on a 24V power diesel cars. ● SIMPLE OPERATION - Compatible with iOS (no Bluetooth pairing needed; connect in the app) & Android devices. No complex settings or tricky connections plus much lower power consumption compared to WiFi OBD2 code reader, and it does not block internet access for other apps. ● LOW POWER CONSUMPTION - Vgate iCar Pro Bluetooth 4.0 adapter supports auto sleep & auto wake and consumes as low as 3MA when sleeping, which helps save car battery power. Note: auto wake for electric and hybrid vehicles is not supported. Requires reinsertion to wake up. ● SMALL COMPACT DESIGN - Easy to plug in and unplug in your car OBDII port. The majority of cars made in the past 2 decades are fitted with an OBD2 diagnostic port, simply find the port and plug the Vgate iCar Pro Bluetooth in. ● SUPPORT UPGRADE - Support for upgrading product firmware on phones and Windows PC. Please contact Vgatemall team. Product Description [OBD APP MUST BE PURCHASED SEPARATELY] Vgate iCar Pro Bluetooth 4.0 OBD2 Code Reader Diagnostic Tool for iOS/Android 5 EASY STEPS 1. INSTALL THE APPS Android: Torque, Dr.Prius, etc iOS: JScan, BimmerCode, etc 2. INSERT OBD2 PORT Locate the OBD2 port and install firmly. 3. IGNITION ON Refer to car manual for detailed operation. 4. TURN ON BLUETOOTH Note: Android and iOS Bluetooth connection operates differently. 5. RUB THE APPS Vgate iCar Pro Bluetooth4.0 works with most popular OBD2 apps. Please set the connection according to the app. HOW TO UPGRADE THE FIRMWARE - Vgate iCar Pro Bluetooth 4.0 OBD2 ADAPTER Please try to use the QR code reader that comes with your phone to scan. Could not pair with Android? Turn off Bluetooth and turn it back on (a few times); restart your phone; clear Bluetooth cache/storage. Search for the Bluetooth device name "Android-Vlink" and enter the pairing code "1234". Could not pair with iOS device? NOTE: DO NOT Need to pair Bluetooth Name on iOS device. Just Enable Bluetooth on the iOS device. Then configure Bluetooth device name in the OBD app setting. Why can't Vgate iCar Pro Bluetooth 4.0 OBD2 Scan Tool be automatically woken up after going to sleep? Vgate iCar Pro automatically sleeps after the car meter is turned off for 20 to 30 minutes. For Electric, Hybrid cars, iCar Pro does not support automatic wake-up after entering sleep mode, and can only be woken up by re-plugging the product. What kind of apps does Vgate iCar Pro support? Vgate iCar Pro Bluetooth4.0 Car Code Reader is fully compatible with ELM327, so it supports OBD2 APP based on ELM327 command, Such as Torque, Car Scanner, OBD Fusion, OBD JScan, BimmerCode, etc. How do I perform a firmware upgrade on the cell phone? Please use the QR code reader that comes with your phone to scan QR code on the package. This QR code can be used to download the Upgrade app and to perform product upgrades. My Car, My Way Vgate iCar Pro Bluetooth 4.0 OBD2 Car Code Reader Vgate iCar Pro Bluetooth 4.0 OBD2 Car Scanner works with most popular OBD2 APPs. Vgate Product Family Single Wire CAN (GMLAN) ✘ ✔ ✘ ✘ Medium Speed CAN (MS-CAN) ✘ ✔ ✔ ✘ Auto Sleep Mode ✔ ✔ ✔ ✔ Button Wake up Device ✘ ✔ ✘ ✘ Work with all Android devices ✔ ✔ ✔ ✔ Work with Apple(iOS) devices ✔ ✔ ✔ ✔ Compatible with ELM327 Command v2.3 v2.2 v2.2 v2.2 Compatible with ELM329 Command — v2.2 v2.2 v2.2 Compatible with STN Command ✘ ✔ ✔ ✘ Maximun number of bytes sent 8 1023 1023 1023