GEPRC TAKER F722 BLS 80A 65A 60A V2 STACK BLS 4IN1 ESC 16MB Black Box Data Analyze Record Flight FPV Drone Data Plug Play Racing
thedroneflight.com

GEPRC TAKER F722 BLS 80A 65A 60A V2 STACK BLS 4IN1 ESC 16MB Black Box Data Analyze Record Flight FPV Drone Data Plug Play Racing

$152.98
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

Thedroneflight

View Store

SPECIFICATIONSBrand Name: NoEnName_NullHign-concerned Chemical: NoneIs Electric: No batteryOrigin: Mainland ChinaMaterial: Composite MaterialRecommend Age: 14+yRC Parts & Accs: STACKFor Vehicle Type: HelicoptersUse: Vehicles & Remote Control ToysUpgrade Parts/Accessories: STACKRemote Control Peripherals/Devices: ESCTool Supplies: Assembly CategoryQuantity: 1 pcsModel Number: GEPRC TAKER F722 BLS V2 STACKFour-wheel Drive Attributes: STACKWheelbase: Screws Notice! The specifications of each type are different, please look carefully TAKER F722BLS 60A V2 STACK Features Use mainstream STM32F722 chip Equipped with the latest 42688-P gyroscope  16M black box storage Integrated LC filter Upgrade type-C USB interface Directly plugged into the D JI Air Unit With TAKER H60_BLS 60A 4IN1 ESC, the flying feel is silky Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably 9V@2.5A + 5V@3A dual independent BEC Specifications GEP-F722-HD v2 Flight Controller MCU: STM32F722 IMU: ICM42688-P(SPI) Air Unit Connection:Direct plugging into D JI Air Unit Black Box: 16M onboard USB Connector: Type-C OSD: BetaFlight OSD w/ AT7456E chip BEC: 5V@3A,9V@2.5A dual BEC Firmware Target: GEPRCF722 Size: 36.85x36.85mm, hole 30.5x30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle. Input Voltage: 3-6S LiPo UART:5 Power Filter: Integrated LC filter Weight: 8.1g TAKER H60_BLS 60A 4IN1 ESC Input Voltage: 3-6S Lipo Galvanometer: Support Continuous Current: 60A Burst Current: 65A(5 second) Support Protocol: Dshot 150/300/600 Size: 42x45.7mm,hole30.5x30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring. Weight:14.9g Target: B_X_30 Includes 1 x Flight Controller 1 x ESC 1 x Capacitor 1 x D JI Air Unit Adapter Cable 1 x Flight Controller Adapter Cable 1 x XT60 Power cable 4 x M3*30 Screws 4 x M3*25 Screws 8 x Nylon nuts 8 x Silicone grommets 2 x sh1.0 4pinsilicone cable 1 x Camera connection cable   TAKER F722BLS 65A V2 STACK Features Uses the mainstream STM32F722 chip Equipped with the latest 42688-P gyroscope 16M onboard black box storage Integrated LC filter Upgraded Type-C USB interface Directly plugs into the D JI Air Unit Paired with the TAKER H65_8S_BLS 65A 4IN1 ESC, providing a smooth flying experience Simple and efficient installation method with shock absorbers for stable gyroscope performance Dual independent BECs: 9V@2.5A and 5V@3A Specifications GEP-F722-HD v2 Flight Controller MCU: STM32F722 IMU: ICM42688-P(SPI) Air Unit Connection:Direct plugging into D JI Air Unit Black Box: 16M onboard USB Interface: Type-C  Barometer: supported OSD: BetaFlight OSD w/ AT7456E chip BEC: 5V@3A,9V@2.5A dual BEC Firmware Target: GEPRCF722 Dimension: 36.85x36.85mm, mounting hole size 30.5x30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle. Input Voltage: 3-6S LiPo  UART: 5 Power Filter: Integrated LC filter Weight: 8.1g TAKER H65_8S_BLS 65A 4IN1 ESC Input Voltage: 3-8S Lipo Ammeter: Supported Continuous Current：65A Burst Current：70A（5 seconds） Support Protocol: Dshot 150/300/600 Dimension：42x45.7mm,mounting hole size30.5x30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring. Weight: 14.9g Firmware Target: B_X_30 Includes 1 x FC board 1 x ESC board 1 x Capacitor 1 x D JI Air Unit adapter cable 1 x Flight controller adapter cable 1 x XT60 power cable 4 x M3*30 screws 4 x M3*25 screws 8 x Nylon nuts 8 x Silicone anti-shake pads 2 x sh1.0 4pin silicone cable 1 x Camera connection cable   TAKER F722BLS 80A V2 STACK Features  Use mainstream STM32F722 chip  Equipped with the latest 42688-P gyroscope   16M black box storage  Integrated LC filter  Upgrade type-C USB interface  Directly plugged into the D JI Air Unit  With TAKER H80_BLS 80A 4IN1 ESC, Dual MOS, high current, silky flight  Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably  9V@2.5A + 5V@3A dual independent BEC Specifications GEP-F722-HD v2 Flight Controller  MCU:STM32F722  IMU:ICM42688-P(SPI)  Air Unit Connection:Direct plugging into D JI Air Unit  Black Box:16M onboard USB Interface:Type-C  Barometer: support OSD:BetaFlight OSD w/ AT7456E chip BEC:5V@3A,9V@2.5A dual BEC Firmware Target:GEPRCF722 Size:36.85x36.85mm, hole 30.5x30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle. Input Voltage:3-6S LiPo  UART:5 Power Filter:Integrated LC filter Weight:8.1g TAKER H80_BLS 80A 4IN1 ESC  Input Voltage: 3-6S Lipo  Ammeter: Support  Continue Current:80A  Burst Current:85A(5 second)  Support Protocol: Dshot 150/300/600  Size:56.3*61.1mm,hole30.5x30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.  Weight: 28.1g Target: B_X_30 Includes 1 x Flight Controller 1 x ESC 1 x Capacitor 1 x D JI Air Unit Adapter Cable 1 x Flight Controller Adapter Cable 1 x XT60 Power cable 4 x M3*30 Screws 4 x M3*25 Screws 8 x Nylon nuts 8 x Silicone grommets 2 x sh1.0 4pinsilicone cable 1 x Camera connection cable

Show More Show Less