
Supermicro Motherboard MBD-X11SCL-F-O S1151 E-2100 C242 128GB DDR4 PCIE mATX Brown Box
Physical Stats Form Factor microATXProcessor/Cache CPU 8th/9th Generation Intel Corei3/Pentium/Celeron Processor, Intel Xeon E-2100 Processor, Intel Xeon E-2200 Processor.Single Socket LGA-1151 (Socket H4) supported, CPU TDP support Up to 95W TDPCores / Cache 6 cores, 12 threads Note BIOS version 1.0b or above is required to support Intel Xeon E-2200 and 9th Generation Intel Core i3/Pentium/Celeron Processors System Memory Memory Capacity Up to 128GB Unbuffered ECC UDIMM, DDR4-2666MHz, in 4 DIMM slots Memory Type 2667/2400/2133MHz ECC DDR4 SDRAM 72-bit DIMM Sizes 4GB, 8GB, 16GB, 32GB Memory Voltage 1.2V Error Detection Corrects single-bit errorsOn-Board Devices Chipset Intel C242 SATA Intel C242 controller for 6 SATA3 (6 Gbps) ports RAID 0,1,5,10IPMI ASPEED AST2500 Network Controllers Dual LAN with 1GbE with Intel I210 Graphics Aspeed AST2500 BMCInput / Output USB 6 USB 2.0 ports (2 rear + 4 via headers) 5 USB 3.1 Gen1 ports (2 Rears Type A, 2 via headers, 1 Type A) Video Output 1 VGA portSerial Port / Header 2 COM Ports (1 rear, 1 header) TPM 1 TPM HeaderExpansion Slots PCI-E 1 PCI-E 3.0 x8 (in x16 slot), 2 PCI-E 3.0 x4 (in x8 slot) M.2 M.2 Interface: 1 PCI-E 3.0 x4Form Factor: 2280/22110Key: M-Key Double Height ConnectorSystem BIOS BIOS Type UEFI 256Mb BIOS Features ACPI 6.0SMBIOS 2.7Plug and Play (PnP) RTC (Real Time Clock) WakeupUEFI 2.7USB Keyboard supportPCI 3.0 Management Software IPMI2.0, KVM with dedicated LAN, SSM, SUM, SuperDoctor 5 Power Configurations ACPI Power Management Power-on mode for AC power recoveryPC Health Monitoring Voltage +12V, +3.3V, +5V, +5V standby, 5 -fan status, Chassis intrusion header, Chipset Voltage, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, VBAT FAN 5x 4-pin fan headers (up to 5 fans), 5 fans with tachometer status monitoring, Overheat LED indication, PWM fan speed control, Thermal control tachometer fan connectors Temperature Thermal Monitor 2 (TM2) support, CPU thermal trip support, PECI, Monitoring for CPU and chassis environment LED CPU / System Overheat LED, UID/Remote UID Other Features ACPI power management, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, M.2 NGFF connector, UID, WOL Operating Environment Operating Temperature Range 0oC - 50oC (32oF - 122oF) Non-Operating Temperature Range -40oC - 70oC (-40oF - 158oF) Operating Relative Humidity Range 8% - 90% (non-condensing) Non-Operating Relative Humidity Range 5% - 95% (non-condensing)