Supermicro Motherboard MBD-X11SRL-F-B Xeon W-2100 LGA 2066 C422 Max 512GB DDR4 PCI Express ATX Bulk Pack
Physical StatsForm FactorATXProcessor/CacheCPUIntel Xeon W-2100 Processors, Intel Xeon W-2200 ProcessorsSingle Socket LGA-2066 (Socket R4) supported, CPU TDP support Up to 165W TDPCores / Cache18 cores, 36 threadsNoteW-2200 CPU is supported on the motherboards with BIOS 2.0 or newer upon receiving from SupermicroNoteTo support 165W W-2200 CPUs, BIOS 2.0 and VRM update by Supermicro are requiredSystem MemoryMemory CapacityUp to 512GB ECC RDIMM, DDR4-2933MHz Up to 1TB Registered ECC LRDIMM, DDR4-2933MHz, in 8 DIMM slotsMemory Type2666/2400/2133MHz ECC DDR4 RDIMM, LRDIMMDIMM Sizes4GB, 8GB, 16GB, 32GB, 64GB, 128GBMemory Voltage1.2VError DetectionCorrects single-bit errorsOn-Board DevicesChipsetIntel C422SATAIntel C422 controller for 8 SATA3 (6 Gbps) ports RAID 0,1,5,10IPMIASPEED AST2500Network ControllersDual LAN with Intel i210 Gigabit Ethernet ControllerGraphicsAspeed AST2500 BMCInput / OutputSATA8 SATA3 (6Gbps) portsLAN2 RJ45 Gigabit Ethernet LAN portsUSB6 USB 2.0 ports (2 rear + 4 via headers) 5 USB 3.2 Gen1 ports (2 rear + 2 via headers + 1 Type A)Video Output1 VGA portSerial Port / Header2 COM Ports (1 rear, 1 header)TPMTPM HeaderExpansion SlotsPCI-E3 PCI-E 3.0 x8, 1 PCI-E 3.0 x16, 1 PCI-E 3.0 x8 (in x16 slot), 1 PCI-E 3.0 x4 (in x8 slot)M.2M.2 Interface: 1 PCI-E 3.0 x4Form Factor: 2280/22110Key: M-KeyDouble Height ConnectorSystem BIOSBIOS TypeAMI UEFIBIOS FeaturesACPI 6.2SMBIOS 3.0 or laterUEFI 2.7ManagementSoftwareIPMI2.0, KVM with dedicated LAN, SUM, SuperDoctor 5, WatchdogPower ConfigurationsACPI Power ManagementCPU thermal trip support for processor protectionPower-on mode for AC power recoveryPC Health MonitoringVoltage+1.8V, +12V, +3.3V, +5V, +5V standby, 3.3V standby, 7-fan status, Chassis intrusion header, HT, Monitors CPU voltages, System temperature, VBATFAN7x 4-pin fan headers (up to 7 fans), Fan speed control, Overheat LED indication, PWM fan speed control, System level controlTemperaturePECI, CPU thermal trip support, Thermal Control for 6 Fan ConnectorsLEDCPU / System Overheat LED, UID/Remote UID, Suspend static indicator LEDOther FeaturesACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, RoHS, UIDOperating EnvironmentOperating Temperature Range0oC - 50oC (32oF - 122oF)Non-Operating Temperature Range-20oC - 60oC (-4oF - 140oF)Operating Relative Humidity Range10% - 85% (non-condensing)Non-Operating Relative Humidity Range10% - 95% (non-condensing)