Supermicro Motherboard MBD-X12STH-F-O E-2300 S1200 H5 C256 128G DDR4 MicroATX Retail
MPNMBD-X12STH-F-OPhysical Stats Form FactorMicro-ATX Dimension9.6" x 9.6" (24.38cm x 24.38cm)ProcessorCPU10th Generation Intel Pentium Processor, Intel Xeon E-2300 ProcessorSingle Socket LGA-1200 (Socket H5) supported, CPU TDP supports Up to 95W TDPCoreUp to 8 cores, 16 threadsSystem MemoryMemory Capacity4 DIMM slotsUp to 128GB Unbuffered ECC UDIMM, DDR4-3200MHzMemory Type3200/2933/2666MHz SDRAMDIMM Sizes4GB, 8GB, 16GB, 32GBMemory Voltage1.2VError DetectionCorrects single-bit errorsOn-Board DevicesChipsetIntel C256SATAIntel C256 controller for 8 SATA3 (6 Gbps) ports RAID 0,1,5,10IPMIASPEED AST2600 BMCGraphicsASPEED AST2600 BMCNetwork ControllersDual LAN with Intel Ethernet Controller I210Input / OutputSATA8 SATA3 (6Gbps) port(s) LAN2 RJ45 Gigabit Ethernet LAN portsUSB6 USB 2.0 port(s) (4 via header 2 rear) 5 USB 3.2 Gen1 port(s) (2 via header 2 rear 1 type A) Video Output1 VGA port(s) Serial Port2 COM Port(s) (1 header 1 rear) DOM2 SATA DOM (Disk on Module) power connector supportTPM1 TPM HeaderExpansion Slots PCI-E1 PCI-E 3.0 x4 (in x8 slot), 1 PCI-E 4.0 x16, 1 PCI-E 4.0 x4 (in x8 slot) M.2M.2 Interface: 1 PCI-E 3.0 x4Form Factor: 2280/22110Key: M-KeySystem BIOSBIOS Type256MB UEFIBIOS FeaturesACPI 6.0SMBIOS 2.7Plug and Play (PnP) RTC (Real Time Clock) WakeupUEFI 2.7USB Keyboard supportPCI 3.0ManagementSoftwareSuperDoctor 5, NMI, SUM, SPM, Intel Node Manager, SSM, IPMI2.0, WatchdogSystem Management SoftwareIPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM supportPower ConfigurationsPower-on mode for AC power recovery, ACPI Power ManagementPC Health MonitoringVoltageVBAT, System level control, Supports system management utility, Monitors CPU voltages, Chipset Voltage, Chassis intrusion header, 6 -fan status, +5V standby, +5V, +3.3V, +12V, Memory VoltagesLEDUID/Remote UIDCPU / System Overheat LEDTemperatureMonitoring for CPU and chassis environmentCPU thermal trip supportThermal Monitor 2 (TM2) supportPECIFAN6x 4-pin fan headers (up to 6 fans) Thermal control tachometer fan connectorsFan speed control6 fans with tachometer status monitoringOverheat LED indicationOther FeaturesWOLUIDNode Manager SupportM.2 NGFF connectorDual Cooling ZonesCPU thermal trip support for processor protectionControl of power-on for recovery from AC power lossChassis intrusion headerChassis intrusion detectionACPI power managementOperating EnvironmentOperating Temperature Range0oC - 50oC (32oF - 122oF) Non-Operating Temperature Range-40oC - 70oC (-40oF - 158oF) Operating Relative Humidity Range8% - 90% (non-condensing) Non Operating Relative Humidity Range5% - 95% (non-condensing)