Supermicro Motherboard MBD-X12STL-IF-O C252 LGA1200 Socket H5 Max64GB DDR4 Mini-ITX Retail
MPNMBD-X12STL-IF-O Form FactorMini-ITX Processor CPU10th Generation Intel Pentium Processor, Intel Xeon E-2300 ProcessorSingle Socket LGA-1200 (Socket H5) supported, CPU TDP supports Up to 95W TDP CoreUp to 8 cores System Memory Memory Capacity2 DIMM slotsUp to 64GB Unbuffered ECC UDIMM, DDR4-3200MHz Memory Type3200/2933/2666MHz SDRAM DIMM Sizes4GB, 8GB, 16GB, 32GB Memory Voltage1.2V Error DetectionCorrects single-bit errors On-Board Devices ChipsetIntel C252 SATAIntel C252 controller for 6 SATA3 (6 Gbps) ports, RAID 0,1,5,10 IPMIASPEED AST2600 BMC GraphicsASPEED AST2600 BMC Network ControllersDual LAN with Intel i210 Gigabit Ethernet Controller Input / Output SATA6 SATA3 (6Gbps) port(s) LAN2 RJ45 Gigabit Ethernet LAN ports USB4 USB 2.0 port(s) (2 rear, 2 via header) 4 USB 3.2 Gen1 port(s) (2 via header, 2 rear) Video Output1 VGA D-Sub Connector port(s) Serial Port1 COM Port(s) (1 rear) DOM2 SATA DOM (Disk on Module) power connector support TPM1 TPM Header Expansion Slots PCI-E1 PCI-E 4.0 x16 M.2M.2 Interface: 1 PCI-E 3.0 x4Form Factor: 2280Key: M-Key System BIOS BIOS Type256MB UEFI BIOS FeaturesACPI 6.0SMBIOS 3.3Plug and Play (PnP) RTC (Real Time Clock) WakeupUEFI 2.7USB Keyboard supportPCI 3.0 Management SoftwareSuperDoctor 5, SUM, SPM, SSM, IPMI2.0, Watchdog System Management SoftwareIPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support Power ConfigurationsPower-on mode for AC power recovery, ACPI Power Management PC Health Monitoring VoltageVBAT, System level control, Supports system management utility, Monitors CPU voltages, Chipset Voltage, Chassis intrusion header, 4 -fan status, 3.3V standby, +5V standby, +5V, +3.3V, +12V, +1.8V, Memory Voltages LEDUID/Remote UIDCPU / System Overheat LED TemperatureMonitoring for CPU and chassis environmentCPU thermal trip supportThermal Monitor 2 (TM2) supportPECI FAN4x 4-pin fan headers (up to 4 fans) Thermal control tachometer fan connectorsFan speed control4 fans with tachometer monitoringOverheat LED indication Other FeaturesWOL, UID, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion detection, ACPI power management Operating Environment Operating Temperature Range0oC - 50oC (32oF - 122oF) Non-Operating Temperature Range-20oC - 60oC (-4oF - 140oF) Operating Relative Humidity Range10% - 85% (non-condensing) Non Operating Relative Humidity Range10% - 95% (non-condensing)