Supermicro System SYS-E200-8D Xeon D-1528 FCBGA1667 2.5inch DDR4 SATA PCI Express Retail
Form FactorMini-1UProcessor/CacheCPU:- Intel Xeon Processor D-1528- FCBGA 1667- CPU TDP Support 35W, 9MB, 6-Cores, 12-Threads, 1.9 to 2.2GHzSystem MemoryMemory Capacity:- 4 x DDR4 DIMM Sockets- Supports up to 128GB DDR4 ECC RDIMM- Supports up to 64GB DDR4 ECC/Non-ECC UDIMMMemory Type: 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMMDIMM Sizes: 32GB, 16GB, 8GB, 4GBMemory Voltage: 1.2VError Detection:- Corrects Single Bit Errors- Detects Double Bit Errors (Using ECC Memory)On-Board DevicesChipset: System on ChipSATA: SoC Controller for 6 SATA 3 (6Gbps) PortsNetwork Controllers:- Dual Lan via Intel i350-AM2 Gigabit Ethernet- Dual LAN via SoC 10GBase-T- Virtual Machine Device Queues reduce I/O Overhead- Supports 10GBASE-T, 100BASE-TX and 1000BASE-T RJ45 Output- Realtek RTL8201N PHY (Dedicated IPMI)IPMI:- Support for Intelligent Platform management Interface 2.0- IPMI 2.0 with Virtual media over LAN and KVM-Over-LAN SupportGraphics: Aspeed AST2400Input/OutputSATA: 6 SATA3 (6Gbps) PortsLAN:- 2 RJ45 Gigabit Ethernet LAN Ports- 2 RJ45 10GBase-T Ports- 1 RJ45 Dedicated IPMI LAN PortsUSB: 2 x USB 3.0 Ports (Rear)Display: 1 x VGA PortsDOM: 2 x SuperDOM (Disk on Module) Power ConnectionsTPM: TPM 2.0 HeaderFront PanelButtons: Power On/Off ButtonLEDs: Power LED (Hard Drive Activity LED)Expansion SlotsM.2:- Interface: PCI-E 3.0 x4Form Factor: M Key 2242/2280/22110Support SATA DevicesDrive BaysInternal: 2.5inch Fixed drive bay with bracket (Design for 9.5mm thickness HDD with Low Profile memory)System CoolingFans: Passive CPU Heat Sink and 2x 40mm Chassis FanPower Supply DC Power AdapterSystem BIOsBIOs Type: 128MB SPI Flash with AMI BIOsBIOs Features:- PCI 3.0- ACPI 5.0USB Keyboard Support- Hardware BIOs Virus Protection-SMBIOS 2.8- UEFI 2.4- RTC (Real Time Clock) Wake upManagementSoftware:- IPMI 2.0- KVM with Dedicated LAN- NMI- SUM- SuperDoctor5- WatchDogPower Configuration:- ACPI/APM Power Management- CPU Fan Auto off in Sleep Mode- Power on Mode for AC Power RecoveryFan:- Fans with tachometer status monitoring- Status monitor for speed control- Low noise fan speed control- Pulse Width Modulated (PWM) fan connectorsOperating Environment/ComplianceRoHS: RoHS CompliantEnvironment Spec:- Operating Temperature: 0 C to 40 C (32 F to 104 F)- Non-Operating Temperature: -40 C to 70 C (-40 F to 158 F)- Operating Relative Humidity: 8% to 90% (Non-Condensing)- Non-Operating Relative Humidity: 5% to 95% (Non-Condensing)