sE Electronics DM2 Dynamite 1-channel Active Inline Preamp

Now in Stock at ThePedalGuy The DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any passive microphone. Resulting in explosive level for all your passive mics. For all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound. Main DM2 Features Switchable, clean and consistent gain from moderate +15dB to explosive +30dB designed for neutral, balanced sound quality with minimal noise explore eight settings ranging from an unconventionally low 50 Ω to stunningly high 10 MΩ to match your preamp with any mic accurately two gain levels for even higher flexibility on various sources ruthlessly boosts the signal independent from load impedance or cable length Whether you’re a podcaster, recording engineer, or running live sound, sE inline preamps are the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration. Reliable operation even in demanding on-stage applications in difficult environments is ensured by a roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards. SOPHISTICATED CLASS-A ELECTRONICS State of the art electronics and high-grade FETs provide supremely low noise Transformerless design for pristine sound quality Provides the lowest noise in its class DEDICATED OUTPUT BUFFER AMPLIFIER Provides +28dB or +15dB / +30dB output independent of load impedance or cable length Extremely low output impedance Drives long cable runs and can reduce susceptibility to RF interference, buzz & hum SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH Efficient rejection of any electrical interference and noise High-quality finish ensures a great look for many years Slim design allows for easy placement in the studio or on stage DM2 TNT Specs Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB) Gain: 15 dB / 30 dB Max output level (0.5% THD): 9.5 dBV (3.0 V) Output noise level: 1 μV @ 15 dB / 6.6 μV @ 30 dB Powering: 48 Volts according to IEC 61938 Electrical impedance: 135 Ohms Recommended load impedance: >1k Ohms Current consumption: 3.1 mA Connectivity: 3-pin male/female XLR connector Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.) Weight: 80 g (2.82 oz.) REQUIREMENTS input: passive microphone (ribbon/dynamic) output: preamp/mixer/audio interface providing 48V phantom power LIMITATIONS not suitable for phantom-powered microphones (condenser microphones, active ribbon microphones)