Neutron Racing Drone BNF (Frsky)

FlightClub Neutron-R 20×20 Race Frame and Canopy Pod Description FlightClub Neutron-R What do you get when you combine the experience over the past 3 years of designing frames and feedback from some of the fastest pilots in the world?  You get the Neutron-R. The Neutron-R is the evolution of an already great race frame, the original Neutron, into a frame that puts it in it’s own class.  FPV racing is hard enough.  The last thing you need to think about is a frame with shortcomings.  The Neutron-R is a frame you can count on so you can focus on winning races. Highlight Features Designed for 20×20 components (see PROton-R for a 30×30 frame) Nucleus Plate – CNC 7075 Milled aluminum plate Threaded holes for arms, flight controller and front accessory (crossfire mount) Hybrid geometry (front SX, rear X) Channel slots in the aluminum plate for the arms 1 screw arm swap Double accessory slots on the top plate for GoPro and Airbender turtle stick. Dead X flight controller placement Chamfered and countersunk holes on the bottom plate 5mm T700 carbon arms Frame weight approximately 70g with 5mm 5″ Hybrid Skeleton Nucleus Plate The nucleus plate in the Neutron-R is milled out of a solid 4.5mm thick 7075 aluminum plate (Neutron uses 3mm).  Through cleaver design, the plate is strategically milled out in certain places to save weight.  But an extra beefy 4.5mm thick where strength matters such as in the arm channels. The arm channels tolerances have been meticulously tweaked so the arms slide in with virtually zero movement at all.  Changing an arm only requires removing one screw.  This equals rock solid arms with no flex or wiggle. There are a total of 12 threaded holes in the Nucleus plate (6 for the arms, 4 flight controller screws, 2 front accessory) to make building and maintenance a breeze.  No need to mess with press nuts or locknuts. Instead of Butter Mounts, the flight controller is now 4 threaded M3 holes.  Virtually all 20×20 flight controllers now have built in soft mounting so the Butter Mounts are not needed.  Having threaded holes for the flight controller making building a breeze and there’s no need for locknuts to secure the stack. Contents Base Neutron-R will include the following 1 – Nucleus CNC Aluminum Plate 1 – 2mm chamfered, countersunk bottom CF Plate 4 – 5mm Arms 4 – M3x20mm Button head screws (for flight controller stack) 6 – M3x10mm Flat Head Hex screws (arm screws) 4 – M3 Nylon nuts 4 – Butter Mounts (can be used as spacers) 1- Ultralite TPU VTX SMA antenna mount 1 – FlightClub Velcro Strap 1 – FlightClub Sticky Battery Pad Stickers TPU Printed Hybrid Pod 2 – M3x10mm standoffs 2 – M3x25mm standoffs 8 – M3x8mm button head hex screws EMAX RS2306 Racing Series Brushless Motor Special Edition (White) (4pcs) DESCRIPTION: The RS2306 was designed to set a new standard of power and response for pilots seeking the ultimate in flight performance. With nearly twice the level of thrust of the original Red Bottom, the new RS2306 sets the bar even higher by pushing 2kg of thrust with 5045x3 propeller on 5S or 6045x3 on 4S.Latest design language used in RS2205-S have been carried over to the RS2306. Lighter bell, hollowed steel shaft, bigger bearings, lower profile, and kept the overall diameter just 0.4mm wider than RS2205-S!KEY FEATURES:-2kg Thrust from a 2306 class motor!-Larger Stator for smooth, responsive power.-BEEFY 4mm Hardened and Tempered Hollow Steel Shaft: Breaking shafts are a thing of the past.-0.15mm High Silicon-Steel Laminations: Higher volume of silicon increases electrical resistance in the lamination, reducing eddy-currents within the system (Translates electrical energy into mechanical energy more efficiently.). -High quality 4mm Inner Diamter Steel Ball Bearings.-1.8mm N48SH Arc magnets (thinner and lighter which allow lower mass on the outer portion of the bell, resulting in faster acceleration. Less energy lost and more power delivered to the propeller).-Special Edition Matte White Bell.-Hex head bell fastener for easy servicing or bell replacement.-PROPLOCK base for future performance-matched propellers: This anti-slip design locks in the propellers on to the motor to prevent Prop slippage during the hardest obstacle strikes.-34 grams - Contrary to what most pilots say about motor weight Lighter is not always better. In this class of a motor that pushed 1,000s of grams of thrust, 34g is the absolute minimum without compromising structural integrity.   Voltage (V) Propeller Current (A) Thrust (g) Power (W) Efficiency Speed (RPM) 12 GF5050 Tri-blade 1 68 12 5.67 5740 11.1 435 133.2 3.27 14480 21.3 715 255.6 2.8 18630 31.2 961 374.4 2.57 21430 40.5 1170 486 2.41 23780 T5045 Tri-blade 1 66 12 5.5 6420 9.1 405 109.2 3.71 15630 17.1 660 205.2 3.22 19990 25.1 864 301.2 2.87 22450 34.2 1118 410.4 2.72 24730 HQ5045 1 56 12 4.67 6200 9.1 356 109.2 3.26 14840 19.1 645 229.2 2.81 19730 27.1 842 325.2 2.59 22450 36.3 1013 435.6 2.33 24750 16 GF5050 Tri-blade 1.1 94 17.6 5.34 6750 15.1 630 241.6 2.61 17260 29.2 1036 467.2 2.22 22230 43 1418 688 2.06 26030 57.2 1762 915.2 1.93 29080 T5045 Tri-blade 1 93 16 5.81 7130 13.1 607 209.6 2.9 18150 27.3 1074 436.8 2.46 24350 39 1422 624 2.28 27460 52.6 1728 841.6 2.05 30080 HQ5045 1.1 75 17.6 4.26 7210 13.1 548 209.6 2.61 18060 27.1 944 433.6 2.18 23450 41 1265 656 1.93 27000 53.9 1482 862.4 1.72 29180   SKU 045000067-0 Brand EMAX Shipping Weight 120.0000 Length 110.00 Width 30.00 Height 70.00 Kv(rpm/v) 2750/2400. Max Current (A) 58.00 Resistance (mh) - Max Voltage(V) 17.00 Power (W) 915.00 Shaft A(mm) 5.00 Length B (mm) 17.10 Diameter C(mm) 28.30 Can Length D(mm) 8.00 Total Length E(mm) 30.10 Mini Magnum 2 - F4 BLHELI32 35amp 6S