Rainbird PGA Inline / Angle Valve with Flow Control 1-1/2 in. FPT | 150-PGA

Rain Bird 150-PGA 1.5 in. FPT Globe/Angle Valve with Flow Control 1½" Rain Bird 150-PGA Valve With Flow Control 1½" Female Threaded Inlet/ Outlet Features & Benefits Built for high-end residential and light commercial applications, Rain Bird PGA series valves are the toughest, most reliable valves in their class. These long-lasting, easy-to-service valves are proven to perform at the highest level, even under harsh temperatures and intense pressure. For maximum peace of mind, PGA series valves also offer a best-in-class, three-year trade warranty. Because you care about your reputation and so do we. Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions Robust construction and electrical design for quiet performance you can count on Filtered pilot flow to resist debris and clogging Slow closing to prevent water hammer and subsequent system damage Normally closed, forward flow design accepts latching solenoid for use with Rain Bird battery-operated controllers Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance* Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service Three-year trade warranty Accommodates optional, field-installed PRS-D pressure regulating dial to ensure optimum sprinkler performance Accepts latching solenoid for use with Rain Bird battery-operated controllers Optional purple flow control handle for non-potable water applications PGA-NP-HAN1 (1" and 1½"); PGA-NP-HAN2 (2") Product Details Pressure: 15 to 150 psi (1.0 to 10.4 bar) Flow without PRS-D option: 2 to 150 GPM (0,5 to 34 m3/h; 0,13 to 9,44 l/s) Flow with PRS-D option: 5 to 150 GPM (1 to 34 m3/h; 0,32 to 9,44 l/s) Temperature: Up to 110°F (43°C) 24 VAC 50/60 Hz (cycles per second) solenoid Inrush current: 0.41A (9.9VA) Holding current: 0.14A (3.43VA) Solenoid Coil resistance: 30-39 Ohms, nominal