LED PCB Pigtail Kit by BLACKHORSE (2 pcs)

**This is a full kit, not just the PCB LED piece only, like you may find in other stores** This is a PCB with LED's on it designed by Team TINY WHOOP pilot Blackhorse. This PCB allows you to run a perfect 180° pigtail with out having to solder the wires at awkward angles. There is one side that you can put the BT2.0 plug into and solder it on to the PCB then solder the wires onto the adjacent pads.  The BT2.0 plugs can be extremely difficult to unplug at times. The PCB allows for you to grip the plug a little easier than without it making it easier to unplug those tough connections. Having the PCB also makes sure that the pins cannot rotate and can not short out during flight.  This is one of the easiest ways to add LEDs to your drone without gluing anything or dealing with extra wires. Included in the Kit: 2x LED PCB boards 4x 40mm 22awg wires 2x BT2.0 Plugs (Male) REMEMBER ROUND IS GROUND! When soldering up these PCB boards to a BT2.0 plug there is a white outline of the BT2.0