1350 Series Double Cardan Drive Shaft

1350 CV Driveshaft This is for those of you who have something more custom and need a 1350 double cardan shaft. For this to work you will have to have one of the options listed in each of the dropdown boxes below. Measure your flanges or yokes and the length as shown in the video embedded at the bottom of the page. Length measurements should be taken at ride height. Then just select the attachment type at each end, select the tube size, and select greaseable or non-greaseable joints. If you need an attachment type that isn't listed or have concerns about angles, having adequate compression/extension, or anything else please call us to order or for more info. 801-737-0757 If you have a 1350 series yoke at the transfer case make sure it is a CV compatible yoke. The bolt spacing in the wide direction should be 2.75" center of hole to center of hole. If it is wider or if you have threaded holes you will need a different yoke.  If you have a flange, specify whether your t-case or pinion fla