
Log Splitter Build Kit: 16 GPM Pump, Coupler, Mount, Bolts, For Huskee, Speeco, etc Replacement or "Build it Yourself"
Brand NEW 16 GPM Log Splitter Pump / 2 Stage Gear Pump This is same pump used by SpeeCo, Champion, Oregon, MTD and many others. Use as a replacement or a "build it yourself" splitter project The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters, 90% efficient. Recommended 8-12hp engine Specifications: 16 GPM @ 3600RPM. Shaft: ½” (key included) Inlet: 1" diameter Outlet: ½” NPT Dimensions: 5.5”L x 3”H x 4”W Minimum HP: 8 RPM Requirement: 3600 for 11 GPM, pump can be operated with lower RPM's For use with open center hydraulic systems only 1st Stage: 13 GPM@650 PSI 2nd Stage: 3 GPM@2500 PSI Maximum Pressure: 4000 PSI Bolt Circle: 2.83in. 4 Bolt Holes Spaced 2in. on Center Bolt Hole Diameter: .344in. Rotation: Clockwise Medium Pump Mount: Length: 5-1/4" Pump Side: 2-3/4" bolt circle, 2" square on center Engine Side: 5" bolt circle, 3-1/2" square on center Holes drilled for 5/16" bolts Cast iron construction Compatible with most 8-15HP gas engines Lovejoy Coupler: - The kit comes with two LO90 coupler halves and one rubber spider to connect the pump to your engine. Choose your engine crankshaft size from the drop-down menu, 5/8", 3/4" or 7/8", 1" or 1-1/8" Bolts, Lock Washers, Nuts Kit comes with the necessary fasteners to bolt the mount and pump together. You'll supply your own engine mounting bolts