GN-180 Small size GNSS GPS GLONASS module,GPS receive antenna,neo m8n Solution,GNSS module,Dual GPS Module,UART TTL level
www.topgnss.store
Electronics / GPS Navigation Systems

GN-180 Small size GNSS GPS GLONASS module,GPS receive antenna,neo m8n Solution,GNSS module,Dual GPS Module,UART TTL level

$34.02
Store Logo

TOPGNSS.store

View Store

   new products,  STOTON High quality SMART GNSS module GN-180(ttl) The latest multi-GNSS platform firmware FW 3.01.   FW 3.01, besides retaining the original functions of GPS, GLONASS, BeiDou, QZSS and SBAS, is now adding Galileo support, which can track 3 satellites at the same time, and can also use all SBAS and QZSS enhancement systems at the same time. GNSS default operating mode: GPS + GLONASS dual mode High-quality components designed to ensure that the receiver performance!         Product highlights: 1. M8030-KT GNSS CHIP AND 18*18*4mm high sensitivity GPS antenna Design 2.Using 0.5PPM KDS high precision TCXO 3. built in RTC crystal and skin capacitance faster thermal initiation 4.1-10Hz location update rate 5.Support the positioning of PPS indicator: positioning success after flashing. 6.Support Online AssistNow and Offline AssistNow and other A-GPS services 7.GPS, GLONASS  SBAS (WAAS, EGNOS, MSAS, GAGAN) hybrid engine Default output: 1HZ  (can be set 5-10HZ) The default baud rate: 9600 (can be set 19200 4800  38400  115200)                         Small volume GPS module, including connector weight: 7.2g. Size only 18*18*8.2mm Internal integrated LNA low noise amplifier circuit design, integrated FLASH, can be easily integrated in The handheld wearable GPS GLONASS equipment and the aeronautical UAV equipment are required for volume. Support refresh rate: 1-10Hz settings save Support baud rate: default 9600 (save settings: 4800-38400-57600-115200) Product features: UART (TTL)output protocol GNSS multi-mode design, support GPS+GLONASS+GALILEO and GPS+ Beidou+GALILEO Positioning mode switching Built in FLASH can be configured to save output parameters Using 8030 chip design 5PIN pin pad Baud rate: 9600 (default) Location mode: GPS+GLONASS (default) GPS+BEI DOU mode can be set M8030-KT chipset TOPGNSS GNSS Module GN-180 Performance GNSS CHIP M8030-KT frequency L1, 1575.42MHz,GLONASS L10F Bei Dou B1 SBAS L1 C/A:WASS, protocol NMEA 0183 v2.3,4.x GPS/QZSS L1 C/A,GLONASS L10F Bei Dou B1 SBAS L1 C/A:WASS, EGNOS,MSAS , Support Galileo E1B/C. Default GPS+GLONASS mode Default:GGA,GSA,GSV,RMC Support:VTG,GLL,TXT binary and NMEA Command Available baud rate (Default 9600) Can be set 1200,4800,19200,38400,57600,115200 bps   Receiving channel 72 Sensitivity Tracking sensitivity:-160Dbm Capture sensitivity:-157dBm Cold start 29s average Warm start time 28s average Hot start time 1s average Precision HorizontalPosition:Autonomous<2.5maverage, SBAS < 2.0m average  Velocity: 0.1 m/s Timepulse signal: RMS 30 ns maximum height 18000  Meter Maximum speed 515 m/s Maximum acceleration 4G Update frequency 1-10Hz(default1HZ A-GPS AssistNow on-line and off-line Working output level output level Output TTL level Physical characteristics PIN 5 pin 1.0pitch  VCC 3.3-5V.GND .TX.RX.PPS. Dimensions 18mm *18 mm * 8.2mm Operating Voltage 3.3V-5.0VDC ±5% weight 5.5g Connector form 1.0 5 PIN Cable length: 15 CM Operating temperature -40 to 85° C Storage temperature -40 to 85° C       Packing list: GNSS module 1PCS          ​       We can provide OEM, ODM service, if you need to buy more quantity, please contact our customer service staff, thank you!     window.adminAccountId=226105558;

Show More Show Less