Two FIERCE10 SUBS + R5 AMPLIFIER @ 1Ω | 1600 Watts RMS

This is our favorite combo pack! Two Fierce10 Dual 4 Ohm Subwoofers Matched perfectly to the R5 Mono Block Amplifier! The FIERCE10 has Dual 2.5" Voice Coils, Ribbed Foam Surrounds with Heavy Duty Cast Aluminum Baskets. Carefully selecting each component from the Tinsel Leads, Direct Connected 10 Gauge Pure Copper Wire to the Double Stacked Strontium Ferrite Magnets we have created a Subwoofer that goes Deeper & plays Louder than our competition. The R5 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize Nickel plated terminal block for power input & speaker output. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R5 Amplifier blends power and performance with sleek design allowing you to Rage in style. FIERCE 10 FEATURES Heavy Duty Textured Cast Aluminum Basket Reinforced Non-Pressed Paper Cone EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility 2.5" / 61.1mm 4-Layer Hi-Temperature Voice Coil for Extended Playing  Double Stacked 250oz High Energy Strontium Ferrite Magnets  Enhanced Cooling T-yoke Design with Black Anodized Finish Black Anodized One Piece Pole-Plate for Added Motor Force Over Sized Mirror Image Dual Poly/ Nomex Spiders Reinforced Fiberglass Woven Dustcap for High Power Applications Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace Customized Rubber Gasket / Magnet Boot Stitched Cone for an Extended Lifespan 10 Gauge Oxygen Free, Pure Copper Wire  Triple Black Poly Cotton Spiders with Mirror Image Layout FIERCE 10 SPECIFICATIONS Size 10" Peak Watts 1600w  (Short Bursts)  RMS Watts 800w  (Daily Driver)  Freq. Response 20Hz ~ 250Hz Displacement 0.05 cu. ft. Fs- F.A.R. 40Hz  Qts 0.63 Vas 0.27 ct. Ft.  X-Max (2-Way) 25mm SPL 86dB Voice Coil 2.5" Dual 4 Ohm Terminals 10 Gauge 100% Copper Direct Input Cables   Basket Die Cast Aluminum  Tinsel Leads Heavy Duty Double Ported Box  23" x 16" x 14" (Round Port  - Two x 4" x 12")  Total Weight  20 Pounds   R5 FEATURES 0 AWG Power / Ground Inputs  Sound Quality Class-D Design Built-In Auto Sensing Turn-On Function (Hi-Inputs) MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks Variable Low Pass Electronic Crossover Selectable Bass Boost EQ ~ 0 ~ 12dB Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output 1Ω Stable Operation with Extensive Output Power Increase Variable Gain Control Remote Level Control Port (for optional controller) R5 SPECIFICATIONS RMS Power 1600w x 1 PEAK Power 4000w x 1 RMS @ 2 Ohms 1100w x 1 RMS @ 4 Ohms 600w x 1 Bridged RMS N/A Min Impedance 1 Ohm LPF / HPF 60Hz ~ 220Hz THD @ RMS Power <1%  S/N (EIA Rated) >100 dB Max Voltage 14.5v RCA Voltage 200mV  ~ 10V Freq. Response 13Hz - 220kHz Crossover Slope 12dB Subsonic Filter 0Hz ~ 60Hz Bass EQ  0dB ~ 12dB Subwoofer EQ 30Hz ~ 120Hz  Dimensions Inches 13.98 (in) x 2.0 (in) x 7.1 (in) Dimensions mm 355mm x 54mm x 171mm