
Adam Audio Sub10 MK2
Adam Audio ADAM Sub10 MK2 The Sub10 MK2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz. A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed. The Sub10 MK2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m). Features & Benefits Linear bass reproduction down to 25 Hz Ideal addition to nearfield and midfield monitors Maximum Peak sound pressure in 1 m ≥ 113 dB Powerful, compression-free sound reproduction even at very high sound levels High efficiency PWM amplifier Low-distortion amplification at both low and high volume levels Special 10" woofer with paper diaphragm Unrestricted bass reproduction for low-fatigue operation even at high volumes Easy manual or automatic (de-)activation If desired, monitoring is possible without the low frequencies According to downward working bass reflex tube with generous dimensions and corresponding rounding Prevention of air turbulence noise Upper cut-off frequency is selectable between 50 - 150 Hz Allows optimal adaptation of the total system on the bass performance of the satellites Connectable high-pass filter for the satellite outputs, which blocks signals below 85 Hz Dolby®- Fair reproduction of film sound Discharging the satellites from the low frequencies Technical Data Subwoofer Number 1 Basket Ø 10" (260 mm) Voice Coil Ø 2" (50 mm) Cone Material Paper Built-in Amplifiers Subwoofer 1 Type PWM Amp. Power RMS / Music 200 W / 300 W Input Connectors Analog XLR / RCA General Data Frequency Response 25 Hz - 150 Hz THD > 60 Hz ≤1 % Max. peak SPL at 1 m ≥113 dB Crossover Frequencies 50 - 150 Hz Input Impedance 10 kOhm Panel Rear Weight 46.3 lb (21 kg) Height x Width x Depth 22" (560 mm) x 12" (300 mm) x 15.5" (400 mm) Warranty 5 years (2 years warranty plus 3 years optional with product registration) Delivery Contents Power cord, manual