
Adam Audio Sub12
Adam Audio ADAM Sub12 The Sub12 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 22 Hz.A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.The Sub12 subwoofer provides a precise combination of low cutoff frequency (-3dB at 22Hz) and an undistorted high sound pressure level (115dB SPL at 1m).Features & Benefits Bass reproduction down to 22 Hz Ideal addition to nearfield and midfield monitors Maximum Peak sound pressure in 1 m ≥ 115 dB Powerful, compression-free sound reproduction even at very high sound levels High efficiency PWM amplifier Low-distortion amplification at both low and high volume levels Special 12" woofer with paper diaphragm Unrestricted bass reproduction for low-fatigue operation even at high volumes Easy manual or automatic (de-)activation If desired, monitoring is possible without the low frequencies Additional sub output Allows building a (double) bass array According to downward working bass reflex tube with generous dimensions and corresponding rounding Prevention of air turbulence noise Crossover frequency is selectable between 50 - 150 Hz Allows optimal adaptation of the total system on the bass performance of the satellites Connectable high-pass filter for the satellite outputs, which blocks signals below 85 Hz Dolby®- Fair reproduction of film sound Discharging the satellites from the low frequencies 2 years warranty with optional extension to 3 years with the registration of the product Full repair service if required for 5 years Technical Data Subwoofer Number 1 Basket Ø 12" (310 mm) Voice Coil Ø 2" (50 mm) Cone Material Paper Built-in Amplifiers Subwoofer 1 Type PWM Amp. Power RMS / Music 200 W / 300 W Input Connectors Analog XLR / RCA General Data Frequency Response 22 Hz - 150 Hz THD > 60 Hz ≤1 % Max. peak SPL at 1 m ≥115 dB Crossover Frequencies 50 - 150 Hz Input Impedance 10 kOhm Panel Rear Weight 57.3 lb (26 kg) Height x Width x Depth 23.5" (600 mm) x 14" (360 mm) x 17.5" (450 mm) Warranty 5 years (2 years warranty plus 3 years optional with product registration) Delivery contents Power cord, manual