52cc Gas Powered Weed Eater, Sesslife 4-in-1 Grass Trimmer with Gas Pole Saw, Hedge Trimmer, Grass Trimmer, Brush Cutter, 2-Cycle Full Crankshaft Grass Edger Lawn Mower for Yard Garden, Orange

Sesslife 4 in 1 Multi-Purpose Weed Eater Comes with Gas Pole Saw, Hedge Trimmer, Grass Trimmer, and Brush Cutter. This Garden Trimming Tool is powered by a 52cc 2 cycle gas full crankshaft engine. Full crankshaft design reduces emissions, increases fuel efficiency, and provides longer life. The starter is designed to pull easily & start quickly. Eliminate the need for four different garden tools and save storage space in your home. Ideal for maintaining large and small areas, cutting thick brush, trimming grass and weeds around trees, and keeping the garden tidy.   Specifications: Item Name: 52CC Gas Powered 4 In 1 Weed Eater Color: Orange/Black Engine Displacement: 52cc Horsepower: 2.2 Fuel Mix Ratio: Gasoline 30: Two-cycle oil 1 Engine Type: Air Cooled 2-Stroke Gasoline Engine Start Type: Recoil Start Max. Engine Speed: 11,000RPM Bar Oil Type: SAE#10W-30 or similar Fuel Tank Capacity: 1200ml Blade Rotation Direction: Counter-Clockwise Certifications: EPA Assembly needed/Assembly: Yes Package Content: 1 x Power Head 1 x String Trimmer 1 x Brush Cutter 1 x Hedge Trimmer 1 x Pole Saw 1 x Bottle Mixer 1 x Manual An effective method to clean oil stains in the cylinder 1. Invert the lawn mower: Turn the lawn mower upside down with the cutter facing up. In this way, oil stains will be concentrated at the bottom of the tool, making cleaning easier. 2. Disassemble the cutter: Remove the cutter and clean the bottom of the cutter with a toothbrush or brush. 3. Clean the cylinder wall: To reduce the oil stain on the cylinder wall, spray the supplied cylinder cleaning agent on the cylinder, leave it for a few minutes, and then rinse the cylinder wall. 4. Replace piston rings: If the dirt in the cylinder is serious, it is recommended to replace the piston rings to achieve thorough cleaning. Matters Needing Attention 1. Use safety precautions: When cleaning the lawn mower, be sure to wear gloves and goggles to prevent oil or debris from injuring your hands or eyes. 2. Do not use water to clean: Do not use water to clean the inside of the lawn mower to avoid causing rust or other damage to the cutter. 3. Pay attention to the cleaning of oil stains: When cleaning the oil stains in the cylinder, be sure to use a special cylinder cleaning agent and perform thorough cleaning to prevent remaining oil stains from damaging the lawn mower. 4. Regular inspection and cleaning: Regular inspection and cleaning of the lawn mower can make the mowing effect better and extend the service life of the lawn mower. In short, if there is a lot of oil in the cylinder of the lawn mower, using the above effective methods to clean it and paying attention to safety and details can restore the lawn mower to a certain working efficiency. Regular inspection and cleaning can keep your lawn mower in good working order and extend its service life.