T3D-002-012 Lineside Fencing (Post and Rail Style)

This 3D model produces a length of Post and Rail Style fencing. For best results we recommend printing at the highest possible resolution your 3D printer can handle, we typically use 0.1mm line height as the quality is improve, the print time and material usage over lower settings is negligible compared to the results. This model will produce about a 189mm length of fencing. Fencing is flexible and narrow enough that it can be easily cut or bent as needed when using PLA. This model is a great candidate for printing with Wood PLA. When printing with wood PLA remember to reduce the speed of your print, increase the temperature and increase the layer height slightly. Specifications Print Dimensions (vary depending on print settings):189x18x1.5mm Print time (at 30mm/sec): 38 minutes Recommended Material: PLA Material Usage: 0.64m (~2g)   Print Settings Trackside3D Small or Medium sized object profile Support Material Disabled Build Plate adhesion skirt (brim is an option with Wood PLA) Infill between 50% and 100% (between 30% and 50% for Wood PLA) Layer Height around 0.12mm - 0.15mm Print laying flat