Treedix Oscilloscope DIY Kit WAVE2 2-Channel Portable Digital Storage Oscilloscope Dual-Channel Handheld 2.4 inch TFT LCD Touch Screen Digital Oscilloscope Kit
Features:· 【Dual-channel oscilloscope DIY kit】This product is the latest dual-channel handheld touch screen digital oscilloscope on the market, it has dual-channel, high sensitivity, can be controlled through the serial port, built-in signal generator, PC upload data, USB or battery charging Features· 【Color touch screen】 Adopt 2.4 inch TFT color touch screen, which is more convenient to carry and work. The products have passed CE certification and are of reliable quality.· 【Built-in signal generator】 In addition to a dual-channel oscilloscope, this product also has a built-in 0-20KHz (sine wave) DDS dual-channel function signal generator. Only advanced oscilloscopes provide built-in function generator and X-Y drawing functions.· 【Controlled via serial port】 The oscilloscope and signal generator can be controlled via serial commands, which facilitates integration with the user system for automatic measurement.· 【Data transmission】 The measurement data can be output from the serial port in CSV format, which is convenient to upload to the PC for processing; it adopts USB/battery power supply methods, and the product package has instructions Highlights of WAVE2: No. of Channels: 2 Bandwidth: 0 – 200KHz per channel Sensitivity range: 5mV/DIV – 20V/DIV (using x1 probe) Maximum input voltage: 50Vpk (using x1 probe) Maximum real time sampling rate: 1MS/s Time Base range 10us/DIV – 500s/DIV X-Y Display Feature: Yes Function Generator Capability: Built-in 0 – 20KHz (sine) dual channel DDS function generator Display Resolution: 320 x 240 Color display Display Size: 2.4″ Touch Display Capability: Yes Battery powered and portable (battery not included in DIY Kit) Important Notes Before beginning to work on the WAVE2 DIY kit, please make sure you have all the tools ready and some soldering experience. Handle soldering iron and all components with care, and keep out of reach from children. About the Battery Please note the battery is not included with the WAVE2 DIY kit, however the kit does come with battery wires with matching header. To help you source your own batteries, please source batteries smaller or equal to the following sizes: L x W x H = 62mm x 40mm x 5mm; or L x W x H = 68mm x 31mm x 5mm Recommended battery size: L x W x H = 59mm x 37mm x 5mm / 1200mAh (usually specified as 503759 1200mAh) Specification General 2.4” 320x240 color display Touch panel operation Y-X mode available Built-in 2-channel DDS function generator Light weight and portable Vertical Number of Channel: 2 Analog Bandwidth: DC – 200KHz Sensitivity: 5mV/Div - 20V/Div (with x1 probe) Sensitivity error: < 5% Resolution: 12-bit Input Impedance: 1M ohm / 25pF Maximum Input Voltage: 50Vpk Coupling: DC, AC Horizontal Max Real-time Sampling Rate: 1Msps (per channel) Timebase: 10us/Div - 500s/Div Record Length: 1024 points Trigger Trigger Modes: Auto, Normal, Single Trigger Types: Rising/falling edge Trigger Position: 1/