Treedix OV7670 Camera Module with FIFO 30W Pixel Image Sensor STM32 Microcontroller Drive Development Board

Features：· OV7670 with fifo module is a module with buffer storage space for slow-speed mcu that can realize image acquisition control.· This module adds a fifo (first-in first-out) memory chip, which also contains a 30w pixel cmos image sensor chip, a 3.6mm focal length lens and lens holder.· Onboard CMOS chip require different power supplies. Core voltage: 1.8V ± 10%. Analog voltage: 2.45V to 3V. IO voltage: 1.7 to 3V.· The board leads out control pins and data pins at the same time, which is convenient for operation and use.· If the internal LDO is used to power the core (1.8V), the I / O voltage should be 2.45V or higher, otherwise the external 1.8V must be used to power the core. Specification： Photosensitive array: 640X480 Core voltage: 1.8V ± 10% Analog voltage: 2.45V to 3V IO voltage: 1.7 to 3V Power consumption: 60mW / 15fpsVGAYUV Sleep: <20μA Temperature operation: -30 ℃ to 70 ℃ Stable work: 0 ℃ to 50 ℃ Output format (8 bits): YUV / YCbCr4: 2: 2 RGB565 / 555/444 GRB4: 2: 2 Raw RGB Data Optical size: 1/6 " Viewing angle: 25 ° Maximum chastity rate: 30fps VGA Sensitivity: 1.3V / (Lux-sec) Signal to noise ratio: 46 dB Dynamic range: 52 dB Browse Mode: Progressive Electronic exposure: Line 1 to Line 510 Pixel area: 3.6μm x 3.6μm Dark current: 12 mV / s at 60 ℃ Well capacity: 17Ke Package included: 1 x OV7670 Camera Module with FIFO